The commands under telephony-service are missing:
Try: telephony-service sdspfarm units 1 sdspfarm transcode sessions 6 sdspfarm tag 1 cmexcoder Gustavo Sánchez ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Viernes, 07 de Marzo de 2008 07:40 a.m. To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] DSP Registration -CME i tried to configure dsp in cme to register with itself instead of CM, but no successful when i do show sccp: Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED output: VG2821#sh sccp SCCP Admin State: UP Gateway IP Address: 10.65.20.23, Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.65.20.23, Port Number: 2000 Priority: N/A, Version: 3.1, Identifier: 1 Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED Active Call Manager: 10.65.20.23, Port Number: 2000 TCP Link Status: NOT_CONNECTED, Profile Identifier: 1 Reported Max Streams: 12, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 VG2821#sh dspfarm all Dspfarm Profile Configuration Profile ID = 1, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Admin State : UP Profile Operation State : RESOURCE ALLOCATED Application : SCCP Status : NOT ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 6 Number of Resource Available : 6 Codec Configuration Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60 Codec : g729r8, Maximum Packetization Period : 60 Codec : g729br8, Maximum Packetization Period : 60 SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED 0 2 9.4.3 UP N/A FREE xcode 1 - - - 0 2 9.4.3 UP N/A FREE xcode 1 - - - 0 2 9.4.3 UP N/A FREE xcode 1 - - - 0 2 9.4.3 UP N/A FREE xcode 1 - - - 0 2 9.4.3 UP N/A FREE xcode 1 - - - 0 2 9.4.3 UP N/A FREE xcode 1 - - - my config as below: VG2821# voice-card 0 dspfarm dsp services dspfarm ! ! interface GigabitEthernet0/0 ip address 10.65.20.23 255.255.255.0 duplex auto speed auto ! sccp local GigabitEthernet0/0 sccp ccm 10.65.20.23 identifier 1 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0 associate ccm 1 priority 1 associate profile 1 register cmexcoder ! dspfarm profile 1 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 6 associate application SCCP any help is appreciated.... Sara ________________________________ Easy + Joy + Powerful = Yahoo! Bookmarks x Toolbar <http://pr.mail.yahoo.co.jp/toolbar/>