Mark, You are a genius, labbing too often can actually make you less effective if you don't rest and let it sink in. Thanks again.
--- Mark Snow <[EMAIL PROTECTED]> wrote: > External Number Mask is only used on Outgoing calls > to make the DN > look like its full DID if the checkbox is checked on > the outgoing > Route Pattern (and for AAR purposes) - but it will > not get a call > inbound from a PSTN or any other GW or Trunk to > route the call to that > DN. > You must either use Sig Digits down to 4 (or > whatever the length of > your internal DNs) on the PSTN Inbound GW - or else > a Translation > Pattern taking 10 digits down to 4. > > HTH, > -- > Mark Snow > CCIE #14073 (Voice, Security) > CCSI #31583 > > Senior Technical Instructor - IPexpert, Inc. > A Cisco Learning Partner - We Accept Learning > Credits! > > Telephone: +1.810.326.1444 > Fax: +1.309.413.4097 > Mailto: [EMAIL PROTECTED] > -- > Join our free online support and peer group > communities: http://www.IPexpert.com/communities > -- > IPexpert - The Global Leader in Self-Study, > Classroom-Based, Video-On- > Demand and Audio Certification Training Tools for > the Cisco CCIE R&S > Lab, CCIE Security Lab, CCIE Service Provider Lab , > CCIE Voice Lab and > CCIE Storage Lab Certifications. > -- > > On Apr 2, 2008, at 7:39 PM, Jacob Owen wrote: > > All, > > I have been getting alot better with voice while > using > > the proctorlabs setup but tonight is making me > > question what I am doing! :) I can't seem to get > > calls to work from the PSTN (IP Blue) into BR1 or > HQ. > > I have the gateways configured correctly and have > > inbound to outbound calls working fine. I have > the > > gateways expecting 10 digits on inbound calls and > have > > external phone number masks assigned to make the > phone > > numbers 10 digits long. I took some debugs from > the > > PSTN WAN and was hoping someone could possibly > tell me > > where I am going wrong. I will include configs > for > > the BR1 router as well: > > > > PSTN/WAN: > > Apr 3 00:03:38.552: ISDN Se0/3/1:23 Q931: > > pak_private_number: Invalid type/plan 0x0 0x0 may > be > > overriden; sw-type 13 > > Apr 3 00:03:38.552: ISDN Se0/3/1:23 Q931: > > pak_private_number: Invalid type/plan 0x0 0x0 may > be > > overriden; sw-type 13 > > Apr 3 00:03:38.552: ISDN Se0/3/1:23 Q931: > Applying > > typeplan for sw-type 0xD is 0x2 0x1, Called num > > 6175292001 > > Apr 3 00:03:38.556: ISDN Se0/3/1:23 Q931: TX -> > SETUP > > pd = 8 callref = 0x00A4 > > Bearer Capability i = 0x8090A2 > > Standard = CCITT > > Transer Capability = Speech > > Transfer Mode = Circuit > > Transfer Rate = 64 kbit/s > > Channel ID i = 0xA98381 > > Exclusive, Channel 1 > > Calling Party Number i = 0x2181, > '2122291111' > > Plan: > > ISDN, Type:National > > Called Party Number i = 0xA1, '6175292001' > > Plan:ISDN, Type:National > > Apr 3 00:03:38.580: ISDN Se0/3/1:23 Q931: RX <- > > RELEASE_COMP pd = 8 callref = 0x80A4 > > Cause i = 0x8081 - Unallocated/unassigned > > number > > > > Apr 3 00:03:46.076: ISDN Se0/3/0:23 Q931: > > pak_private_number: Invalid type/plan 0x0 0x0 may > be > > overriden; sw-type 13 > > Apr 3 00:03:46.076: ISDN Se0/3/0:23 Q931: > > pak_private_number: Invalid type/plan 0x0 0x0 may > be > > overriden; sw-type 13 > > Apr 3 00:03:46.080: ISDN Se0/3/0:23 Q931: > Applying > > typeplan for sw-type 0xD is 0x2 0x1, Called num > > 2122291001 > > Apr 3 00:03:46.080: ISDN Se0/3/0:23 Q931: TX -> > SETUP > > pd = 8 callref = 0x00A5 > > Bearer Capability i = 0x8090A2 > > Standard = CCITT > > Transer Capability = Speech > > Transfer Mode = Circuit > > Transfer Rate = 64 kbit/s > > Channel ID i = 0xA98381 > > Exclusive, Channel 1 > > Calling Party Number i = 0x2181, > '2122291111' > > Plan: > > ISDN, Type:National > > Called Party Number i = 0xA1, '2122291001' > > Plan:ISDN, Type:National > > Apr 3 00:03:46.100: ISDN Se0/3/0:23 Q931: RX <- > > RELEASE_COMP pd = 8 callref = 0x80A5 > > Cause i = 0x8081 - Unallocated/unassigned > > number > > > > > > BR1 Router: > > hostname P19-BR1-RTR > > ! > > boot-start-marker > > boot system > > > flash:c2800nm-adventerprisek9_ivs-mz.124-3g.bin.bin > > boot-end-marker > > ! > > ! > > no aaa new-model > > ! > > resource policy > > ! > > memory-size iomem 20 > > network-clock-participate wic 0 > > network-clock-select 1 T1 0/0/0 > > ip subnet-zero > > ! > > ! > > ip cef > > no ip dhcp use vrf connected > > ip dhcp excluded-address 10.9.201.1 > > ip dhcp excluded-address 10.9.201.254 > > ! > > ip dhcp pool BR1-VOICE-DHCP > > network 10.9.201.0 255.255.255.0 > > option 150 ip 10.9.200.21 > > default-router 10.9.201.1 > > ! > > ! > > ! > > isdn switch-type primary-ni > > ! > > voice-card 0 > > no dspfarm > > ! > > ! > > ! > > voice service voip > > ! > > ! > > ! > > ! > > ! > > controller T1 0/0/0 > > framing esf > > linecode b8zs > > pri-group timeslots 1-3,24 service mgcp > > ! > > controller T1 0/0/1 > > framing esf > > linecode b8zs > > channel-group 0 timeslots 1-24 > > ! > > ! > > ! > > ! > > ! > > interface Loopback0 > > ip address 172.9.101.1 255.255.255.255 > > ip ospf network point-to-point > > ! > > interface FastEthernet0/0 > > no ip address > > shutdown > > duplex auto > > speed auto > > ! > === message truncated === Jacob Owen CCIE #14063 (R&S, Service Provider), CCVP, CCDP ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com