Thanks When you say 4 dsps left do you mean 4 resouces as a pvdm2-8 is only considered half a dsp.
Paul On Sun, May 11, 2008 at 11:22 PM, Edward French <[EMAIL PROTECTED]> wrote: > If you have any FXO or FXS ports they will take DSP resources away from the > pool of available resources also. A good command to see current allocation > is > > Show voice dsp voice > > However the PVDM2-8 is slightly different from the larger dsp's. I know for > sure that it can not be used for conferencing. And I think that it can only > be allocated for dspfarm services if it has 4 dsp's free. So if the E1 is > using 3 and a 2 Port fxs is installed you only have 3 left and can not > allocate them. > > Ed > > > ----- Original Message ---- > From: Paul and Bobs <[EMAIL PROTECTED]> > To: ccie_voice@onlinestudylist.com > Sent: Saturday, May 10, 2008 11:25:37 PM > Subject: [OSL | CCIE_Voice] DSP Resources > > Hi > > What is the minimum DSP's you need in order to configure the minimum amount > of transcoding resaources. I have a PVDM2-8. I am using 3 to terminate the > G711 calls on the controller E1 and was wandering if there was any way of > using the rest \as a transcoding resource. > > Thanks > > paul >