Paul,
Yes. Each device's CCM registration is independently controlled. -- MARK TURPIN | Senior Consultant - UC | Calence / Insight Networking Solutions | www.calence.com <http://www.calence.com/> t. 314.656.2315 c. 314.660.5800 f. 314.656.2355 [EMAIL PROTECTED] The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by replying to this message and destroying the original and all copies. Thank you. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul and Bobs Sent: Saturday, May 24, 2008 12:57 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] 6608 Resources Hi If I have a 6608 blade and I am using say 3 ports for T1 PSTN lines and 1 for Conference and they are registered to one callmanager cluster, can i register the other 5 ports for conference resources on a seperate cluster. Paul