hi there, I think u only have pvdn2-8 in ur router. U can not do conference with it. the reason; 1. u probably have a T1 interface - which steals depends on u rtime slot configured 1-3 on e1/t1 interface, that many DSP from pvdm2-8 2. now lets say u have configure 3 timeslot - 8-3 = 5 timeslot remaining for other stuffs xocing / conferencing 3. xcode should work withoiut any issue bcoz u have 5 session remaining 4. Conf-bridge takes the whole DSP chip a.k.a u need to put another pvdm2-8 and do conferecing on that. u can not share pvdm2-8 for everything.
hth -- Smile, you'll save someone else's day! Frog From: "Onur Tufekci" <[EMAIL PROTECTED]> Subject: Re: [OSL | CCIE_Voice] 0 Conf max sessions To: [EMAIL PROTECTED] Cc: ccievoice1 <[EMAIL PROTECTED]>, OSL CCIE Voice Lab Exam <ccie_voice@onlinestudylist.com> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="windows-1252" Here is the configuration and results: router2(config)#do show run Building configuration... Current configuration : 2938 bytes ! ! Last configuration change at 15:11:09 UTC Mon Jul 7 2008 ! NVRAM config last updated at 14:49:04 UTC Mon Jul 7 2008 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname router2 ! boot-start-marker boot-end-marker ! card type t1 0 0 no logging console enable secret 5 $1$7cJ4$U9gWuPCv.H1DPdXYIyWJD0 ! no aaa new-model ! resource policy ! network-clock-participate wic 0 ! ! ip cef ! ! no ip domain lookup ! isdn switch-type primary-ni ! voice-card 0 dspfarm dsp services dspfarm ! ! ! ! ! ! ! ! ! ! ! !