Do you have call application alternate default configured under global config mode?
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of cisco.voip Sent: Wednesday, August 13, 2008 11:59 PM To: Jonathan Charles Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SRST config - BR2 yes, 2 lines - fully working under call manager. My first experience with SRST, is there other basic thing I can check. ----- Original Message ----- From: Jonathan Charles <mailto:[EMAIL PROTECTED]> To: cisco.voip <mailto:[EMAIL PROTECTED]> Cc: ccie_voice@onlinestudylist.com Sent: Thursday, August 14, 2008 12:53 AM Subject: Re: [OSL | CCIE_Voice] SRST config - BR2 Weird... Silly question, but the phone has a DN when it connected to CCM, right? Jonathan On Wed, Aug 13, 2008 at 11:45 PM, cisco.voip <[EMAIL PROTECTED]> wrote: Here is part of the config - I have only the one phone I am trying to get working BR1#sh ephone ephone-1 Mac:001B.D433.19AA TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 6 and Server in ver 5 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 IP:10.120.0.101 49979 7970 keepalive 0 max_line 8 BR1#s ver Cisco IOS Software, C2600 Software (C2600-ADVIPSERVICESK9-M), Version 12.4(19), RELEASE SOFTWARE (fc1) !ccm-manager switchback immediate ccm-manager fallback-mgcp ccm-manager redundant-host 10.1.200.22 ccm-manager mgcp ccm-manager config server 10.1.200.21 call-manager-fallback max-conferences 1 gain -6 timeouts interdigit 7 ip source-address 10.120.0.1 port 2000 max-ephones 24 max-dn 48 dual-line application mgcpapp dialplan-pattern 1 6175212... extension-length 4 keepalive 20 ----- Original Message ----- From: Jonathan Charles <mailto:[EMAIL PROTECTED]> To: cisco.voip <mailto:[EMAIL PROTECTED]> Cc: ccie_voice@onlinestudylist.com Sent: Thursday, August 14, 2008 12:22 AM Subject: Re: [OSL | CCIE_Voice] SRST config - BR2 Do you have a max-dn configured, is it less than needed? Jonathan On Wed, Aug 13, 2008 at 12:22 AM, cisco.voip <[EMAIL PROTECTED]> wrote: I am configuring up SRST in the lab, and I get the Phone to register correctly and the phones show 'CM Fallback Operatiing' However, I get no line buttons on the phone? CCM 4.1 - IOS 12.4T 2691. Thanks. NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies.
