I believe somewhere ink the past post Vik menitoned that voice class codec will
cause this issue. Let me find the post...
--- On Wed, 11/19/08, Kevin Porter <[EMAIL PROTECTED]> wrote:
> From: Kevin Porter <[EMAIL PROTECTED]>
> Subject: [OSL | CCIE_Voice] CCM-Gatekeeper-CME
> To: ccie_voice@onlinestudylist.com
> Date: Wednesday, November 19, 2008, 6:03 AM
> Got a strange thing happening and need some help...
>
>
>
> Call flow is CCM-Phone->GK-Trunk>CME-Phone and I want
> to allow for one
> G711 and One G729 call through the gatekeeper...
>
>
>
> I have the first call connected with G711 and when I
> attempt the second
> call, I see it route through the gatekeeper and actually
> hit the CME
> router. The issue I see happening is with
> "voice-class codec 1"
> configured for the VoIP dial-peer the call is fast busy.
> If I remove
> the voice-class codec, I successfully get one G711 call and
> 1 G729 call
> as designed...
>
>
>
> Do I have something wrong with the Voice-Class config or is
> it the
> Dial-peer (I have tried reversing the preferences in the
> voice-class
> codec 1)...
>
>
>
> !
>
> voice class codec 1
>
> codec preference 1 g711ulaw
>
> codec preference 2 g729r8
>
> !
>
> voice class h323 1
>
> h225 timeout tcp establish 3
>
> !
>
> dial-peer voice 2 voip
>
> destination-pattern 2...
>
> voice-class codec 1
>
> voice-class h323 1
>
> session target ras
>
> incoming called-number .
>
> tech-prefix 1#
>
> dtmf-relay h245-alphanumeric
>
> no vad
>
> !
>
>
>
> Thanks,
>
> Kevin
>
> Kevin Porter
> Systems Engineer L4
>
> Netelligent Corporation
> 400 South Woods Mill Drive, Suite 105
> St. Louis, MO 63017
>
> Office: (314) 392-6921
> Cell: (314) 852-1252
> Fax: (314) 392-9760
>
> [EMAIL PROTECTED]
> www.netelligent.com
> Bridging The Gap Between Good and GREAT IP Communications!
