When you are in SRST MOH will not stream IP to IP internal to that SRST site. It will however stream to the PSTN, so the PSTN users will still hear MOH. In normal mode (MGCP or H323) IP to IP phone work fine and PSTN work fine.
On Wed, Nov 19, 2008 at 4:53 AM, Kumar, Narinder <[EMAIL PROTECTED] > wrote: > Place the MOH file on router flash. Configure multicast MOH under ur SRST > config and provide ur local GW address. That will do the trick. > > > > Narinder > > > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *Ante Boras > *Sent:* Tuesday, 18 November 2008 9:15 PM > *To:* ccie_voice@onlinestudylist.com > *Subject:* [OSL | CCIE_Voice] Multicast MoH from router > > > > Hello, > > > > what steps must be done on CallManager and router to allow multicast MoH > from router to phones on remote site (no multicast should traverse over WAN) > > > > Ante > > > > > > ------------------------------ > CONFIDENTIALITY - The information contained in this electronic mail message > is confidential and is intended solely for the addressee(s). If you are not > an authorised recipient of this message please contact Getronics Australia > immediately by reply email and destroy/delete this message from your > computer. Any unauthorised form of reproduction of this message, or part > thereof, is strictly prohibited. > DISCLAIMER - Unless specifically indicated otherwise, the views and > opinions expressed in this email are those of the sender and not Getronics > Australia. While we endeavour to protect our network from computer viruses, > Getronics Australia does not warrant that this email or any attachments are > free of viruses or any other defects or errors. It is the duty of the > recipient to virus scan and otherwise test any information contained in this > email before loading onto any computer system. >
