it worked, but i can't make forward all from the phone... never get everthing ----- Original Message ----- From: Hardesty, Scott To: marwa ; OSL CCIE Voice Lab Exam Sent: Sunday, November 23, 2008 4:47 PM Subject: RE: [OSL | CCIE_Voice] VM with SRST and AAR (lab 3)
Use should use the full voicemail pilot number under call-manager fallback without wildcards. Voicemail 912122251600. No translation is needed with the voicemail button as it is a direct call to voicemail and you should be prompted for “password”. Hth. Scott Hardesty | Cisco Engineer | MidAtlantic | Presidio Networked Solutions 7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | [EMAIL PROTECTED] D: 301.313.2041 | C: 443.789.1219 | www.presidio.com ------------------------------------------------------------------------------ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of marwa Sent: Sunday, November 23, 2008 9:35 AM To: OSL CCIE Voice Lab Exam Subject: [OSL | CCIE_Voice] VM with SRST and AAR (lab 3) hello, i am working in lab 3 , i just needed to test the vm with SRST and also in case of AAR in case of SRST i was able to forward the call to vm but if i press the voice mail buttom it fails Also if i went to AAR mode when the hq dials the any ip phone br1 and after the cfw no anwer timesout, it says" enter your password" , but if i made callforward all to vm in br1 i reaches the vm interface Serial0/3/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable call-manager-fallback max-conferences 8 gain -6 ip source-address 172.25.101.1 port 2000 max-ephones 4 max-dn 4 voicemail 9121222512.. call-forward pattern .T call-forward busy 9121222512.. call-forward noan 9121222512.. timeout 9 cor incoming all 1 2002 any advise plz Marwa