this is what you should get. do a "sh ip int brie" and see that both
interfaces have the same IP address
----- Original Message -----
From: "M.Deniz KIZILCABOLUK"
To: "ccie_voice@onlinestudylist.com"
Subject: Re: [OSL | CCIE_Voice] POD 18:Section 15.1
Date: Sun, 23 Nov 2008 16:47:31 +0100
Another info.. when I try to configure IP address I got following
OSPF warning.
Pod18-BR2-RTR(config-if)#ip unnumbered FastEthernet0/0.2
OSPF: No IP address for this interface Service-Engine0/0
2008/11/23 M.Deniz KIZILCABOLUK <[EMAIL PROTECTED]>
Hi,
I have a following config for Service Module, I can ping
10.8.202.2 but can open port 80 (I trıed both from CM and from
my PC via VPN Client)
http://10.8.202.2/Web
interface Service-Engine0/0
ip unnumbered FastEthernet0/0.2
service-module ip address 10.8.202.2 255.255.255.0
service-module ip default-gateway 10.8.202.1
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
ntp peer 10.8.200.3
ip route 10.8.202.2 255.255.255.255 Service-Engine0/0
interface FastEthernet0/0.2
encapsulation dot1Q 280
ip address 10.8.202.1 255.255.255.0
no snmp trap link-status
--
Be Yourself @ mail.com!
Choose From 200+ Email Addresses
Get a Free Account at www.mail.com
