Trying to get Site B phone to call HQ Sip trunk that goes to an analog phone. I know the SIP trunk must support 711only, but I have it set to HQ device pool right now. 711 within HQ and 729 to Site B. I have a HW Xcoder at the HQ side to be invoked to transcode the call so it can be 729 across the wan. I call from the Site B phone and the phone shows 711 all the time. I have double and triple checked the regions and DP. I tested as well by calling Site B phone to HQ phone and hit the ??. That shows 729 call. Xcoder is in the MRGL for both Site B and HQ Phone.
If i set the SIP trunk to G729 only call, it bombs out right way with a fast busy. Is this not an option to have 729 across the wan to a SIP trunk that needs to be 711. Thanks, Ryan Trauernicht