I had this happen today on POD 12 and couldn't figure it out. When it happened to me in the real lab I asked the proctors to look into it and they told me not to worry either. That you weren't graded on replication (not that that was the issue - but in each case replication was broken so it's the only common factor). I did fix the replication - at least in Enterprise Manager. But I don't know how they could grade it with everthing not working. I got zeros on basic things like VM integration, which wasn't working either because the pilot wouldn't ring. Vik, Mark (see thread) I'll ask you since I am desperate. I don't want this to happen to me again and want to be able to find a way out if it does. Any ideas?
--- On Wed, 12/31/08, James Key <j...@jackhenry.com> wrote: From: James Key <j...@jackhenry.com> Subject: RE: [OSL | CCIE_Voice] POD issue -annunciator on every dialed call? To: "Ryan Hicks" <ryanhicks0...@yahoo.com>, "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Date: Wednesday, December 31, 2008, 2:53 PM Yep. I to had the same issue in the real lab, and I actually did pull some of my hair out. I to looked at my pull subscription and it wasn’t there. Asked the Proctor and he told me not to worry about it. I went ahead and fixed ( had a lot of practice on PL racks J ) Still was never able to resolve. Went through the same troubleshooting you did. James From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ryan Hicks Sent: Wednesday, December 31, 2008 2:45 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] POD issue -annunciator on every dialed call? I had this happen the last time I took the real lab so I was feverishly trying to figure it out. If anyone had any insight please feel free to chime in. Configured everything. But when I start testing calls the first digit I dial, the annunciator kicks in. Even with phones in same site. Phones are registed css, pts are right, CTI RPs are registered but will not ring either I took a look at the pull subscription and it was not present. So I rebuilt the subscription. Just like Volume 3 lab1. Question 35. Waiting for pull subscription to be rebuilt. tried again, same issue. I rebooted both pub and sub and same issue. Moved all device registrations to PUB tried, same result, tried all device regs on SUB, same result. Like I said this happened to me in the real lab and was ready to pull my hair out. (never figured it out) Would like too so I can fix it. Don't see too much in the trace files other than station off hook. -Ryan NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies.
