thanks Christian.. I will check tonigth and let you know. On Thu, Jan 15, 2009 at 12:16 PM, Christian Hennrich < christian.hennr...@intact-is.com> wrote:
> Hi, > > I'm using VMware server and I noticed the same behaviour. In VMWare Server > you can disable to sync the vm with the host, aka linux vmware server. Since > then I haven't had problems any more. This is in one of the sub settings of > vmware machine. I do not know, where to find it in the esx box. > > Ryan Trauernicht schrieb: > >> That did not help.... >> >> Digging alittle bit further into this I see that my CM is actually pulling >> clock from my ESX box. Not sure why that is happening. >> Anyone else running ESX for their Call Manager having the same issue? >> >> On Wed, Jan 14, 2009 at 10:41 PM, karuna durai <karu...@gmail.com<mailto: >> karu...@gmail.com>> wrote: >> >> Hi, >> After editing the ntp.conf file please fo to CMD as >> C:\Prog file\cisco\xntp> ntpdate -b <IPADD of NTP> >> >> pls try this and let me know >> >> >> >> >> >> On Thu, Jan 15, 2009 at 4:33 AM, Ryan Trauernicht >> <ryanstudyvo...@gmail.com <mailto:ryanstudyvo...@gmail.com>> wrote: >> >> Any reason why CM will not keep its NTP clock. >> >> I have a local router with the following commands: >> >> ntp master 3 >> ntp source loopback0 (IP address is 192.168.187.1) >> >> >> I have edited the c:\WINNT\System32\Drivers\Etc\ntp.config >> >> My file looks like: >> server 192.168.187.1 # Set Local Clock to Authoritive Time Source >> fudge 192.168.187.1 stratum 5 # Resets Stratum from default 3 to 5 >> driftfile C:\WINNT\system32\drivers\etc\ntp.drift # path for >> drift file >> >> I stopped the Network Time Protocol service and I run >> "ntpdate.exe 192.168.187.1" command from the cmd. >> >> That sets the clock to sync to NTP router just fine. After I >> reboot CM it goes back to GMT it looks like. I see it trying to >> sync but it never does. I have waited over 15mins and nothing. >> >> Thanks, >> Ryan Trauernicht >> >> >> >> >> ______________________________________________________________________ >> This email has been scanned by the MessageLabs Email Security System. >> For more information please visit http://www.messagelabs.com/email >> ______________________________________________________________________ >> >> ______________________________________________________________________ >> This email has been scanned by the MessageLabs Email Security System. >> For more information please visit http://www.messagelabs.com/email >> ______________________________________________________________________ >> >