Scott, as far as i know, the CSS of the VM-Pilot is used to reach the Hunt-Pilot of the Hunt-List/Line-Group of the VM-Ports. See the Voicemail-Pilot as a Speeddial to the Hunt-Pilot.
/Robert >>> <ccielab...@gmail.com> schrieb am Mittwoch, 18. Februar 2009 um 17:59 in Nachricht 884fa9c92a4d8b0e56bd24f2851093dc: > Agreed, the CSS that is assigned to the VM port is used to determine what > dial patterns are available. > My question is the CSS that is assigned to the actual VM PILOT DN. > As I see it, the PILOT DN wouldn't be used for outbound calling. > > - Scott > > > On Wed, Feb 18, 2009 at 11:55 AM, Cliff McGlamry <cl...@mcglamry.net> wrote: > >> You're making an outbound call from the port when you transfer to that >> last number. That uses the CSS to figure out how to route the call. >> >> ----- Original Message ----- >> *From:* ccielab...@gmail.com >> *To:* Jose Gregorio Linero (jlinero) <jlin...@cisco.com> >> *Cc:* OSL Group <ccie_voice@onlinestudylist.com> >> *Sent:* Wednesday, February 18, 2009 10:54 AM >> *Subject:* Re: [OSL | CCIE_Voice] Working on Unity Hunt group scenario. >> >> Jose, >> The CSS was set correctly, but I never "reset" the ports :) >> It's all working now. >> >> BTW: On a semi-related note, What is the significance of the CSS assigned >> to the VM Pilot number? >> I can't see how that DN would ever be leveraged for outbound >> service. >> >> - Scott >> >> >> On Wed, Feb 18, 2009 at 10:46 AM, Jose Gregorio Linero (jlinero) < >> jlin...@cisco.com> wrote: >> >>> Hi: >>> >>> Take a look at the CSS configuration in Unity ports. >>> >>> Regards, >>> >>> Jose >>> >>> ------------------------------ >>> *From:* ccie_voice-boun...@onlinestudylist.com [mailto: >>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of * >>> ccielab...@gmail.com >>> *Sent:* MiƩrcoles, Febrero 18, 2009 10:45 AM >>> *To:* OSL Group >>> *Subject:* [OSL | CCIE_Voice] Working on Unity Hunt group scenario. >>> >>> I'm trying to get a "Poor mans" hunt group working by using Unity Call >>> Handlers to ring a couple of extensions and then ultimately forward the call >>> out to a PSTN phone. I've gotten everything working but the last forward >>> out to a PSTN number (91408xxxxxxx) >>> >>> I've checked and changed the default restriction table in Unity , so I >>> think the call should be allowed. >>> Where can I look to troubleshoot this? The call viewer application doesn't >>> show any good information. >>> >>> Thanks >>> Scott >>> >>> >>