Mike, Do a debug voice dialpeer all on the gateway and see if it is matching a dial-peer. Sounds to me like it isn't .
Might also try using DNA and taking a look to see if it is being blocked or showing as route this pattern. James Key ________________________________ From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mike O [mik...@msn.com] Sent: Saturday, February 21, 2009 11:02 AM To: priyank.ki...@gmail.com; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] CM 7.0 It doesn't even make it to the gateway CM is blocking the call. > Date: Sat, 21 Feb 2009 08:52:37 -0800 > Subject: Re: [OSL | CCIE_Voice] CM 7.0 > From: priyank.ki...@gmail.com > To: mik...@msn.com; ccie_voice@onlinestudylist.com > > What is your dial-peer look like on the outbound gateway when you make > this change? > > > > On 2/21/09, Mike O <mik...@msn.com> wrote: >> >> I have a weird problem with route patterns in CM7. I can create a 911 >> pattern and it dials out to the PSTN no problems, I can see the Q931 debug >> scroll across. >> >> >> >> Now if I change the same route pattern to 9.@ , 9.XXXXXXXXXX etc.. and use >> discard predot I get a fast busy and no debug info. I change it back to 911 >> and it works fine. >> >> >> >> Any ideas >> >> >> >> Thanks, >> >> >> >> Mike >> > > -- > Sent from my mobile device NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies.
