Put following on BR1 to trigger SRST:
ip route ccm pub ip /mask null 0
ip route ccm sub ip/mask null 0
--- On Sun, 3/1/09, Mike Brooks <2xcci...@gmail.com> wrote:
From: Mike Brooks <2xcci...@gmail.com>
Subject: Re: [OSL | CCIE_Voice] BR1 - SRST???
To: "Cliff McGlamry" <cl...@mcglamry.net>
Cc: ccie_voice@onlinestudylist.com
Date: Sunday, March 1, 2009, 6:30 AM
Hey Cliff,
There is a couple ways of doing it, but what I always do is just configure a
call-manager group with just the SUB in it and put it int the BR1 device pool.
Then assign all devices in the BR1 site to the BR1_DP (IP Blue as well). Also,
only configure the BR1 router to communicate with the SUB. Then when you are
ready to test SRST mode then just stop the CM Service on the SUB.
Of course, in the real lab you would just shut down the WAN link and test.
hth,
Mike Brooks
CCIE#16027 (R&S)
On Sun, Mar 1, 2009 at 8:52 AM, Cliff McGlamry <cl...@mcglamry.net> wrote:
How do you throw BR1 into SRST so that IP Blue will register to the BR1 router
but still be able to go via PSTN to Unity?
