This is a nice feature of catos that affects us all from time to time.
Configure the port by referencing the table. Or try telnet from the ccm.
Vik Malhi - CCIE#13890
Senior Technical Instructor - IPexpert Inc
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join IPexpert's Free CCIE Peer Groups & Study Communities at
www.IPexpert.com/communities
On Mar 10, 2009, at 7:51 PM, CCIE OSL <ccie...@gmail.com> wrote:
This may sound strange,
For some reason, I was not able to type in a command in 6509.
I was able to log into 6509, but when I put in sh port or sh vlan,
it freezes and will not come back.
This is from my 3640 EZVPN router.
So, I tried via regular Cisco VPN, it work fine.
I am using standard ACL from proctorlabs.com
///////////////////??????????????????????????////
Password:
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable)
VOICE-6500-1> (enable) sh vlan
its stuck, no output,
/Jin Jung...
