Yeah, that's what I discovered after some digging. In this lab that
didn't matter since CME was using Unity for VM. As you probably know,
Unity registers its ports as ephones. So the ports appear to the
router as a pots connection. Therefore GK to VM (voip to pots) presents
no problem as such.
Thanks
Chris
Cliff McGlamry wrote:
Chris,
The voice service voip section allows you to connect a voip dial peer to
another voip dial peer. If you have a call coming in from gatekeeper to a
phone that gets forwarded to voicemail, it will fail if you don't have this
configured (since you haven't configured voice service voip to allow voip to
voip connections).
Cliff
----- Original Message -----
From: "Chris Parker" <[email protected]>
To: "Cliff McGlamry" <[email protected]>
Cc: <[email protected]>
Sent: Saturday, March 28, 2009 2:23 PM
Subject: Re: [OSL | CCIE_Voice] CME GK GW Type
OK now my question is ... what does the "no voice service voip" do? I
can still call from my phone to CUE etc. Does it break voip to voip
calls, but not pots to voip?
Chris Parker wrote:
If I issue "no voice service voip" on the CME router than I get:
Pod12-HQ-RTR#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type
Flags
--------------- ----- --------------- ----- --------- ----
-----
172.2.102.1 1720 172.2.102.1 49169 CCM VOIP-GW
H323-ID: Pod12-BR2-RTR
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 1
Of course this has other ramifications .....
Chris
Chris Parker wrote:
Well....Im wondering if taking no-reg off my dn's is necessary ....
Tried that and I still get:
Pod12-HQ-RTR#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type
Flags
--------------- ----- --------------- ----- --------- ----
-----
172.2.102.1 1720 172.2.102.1 52983 CCM H323-GW
H323-ID: Pod12-BR2-RTR
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 1
Heres my config:
Pod12-BR2-RTR#sh run
Building configuration...
Current configuration : 7889 bytes
!
! Last configuration change at 20:15:08 CET Sat Mar 28 2009
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Pod12-BR2-RTR
!
boot-start-marker
boot system flash c2800nm-adventerprisek9_ivs-mz.124-3g.bin
boot-end-marker
!
logging buffered 4096 debugging
!
no aaa new-model
!
resource policy
!
memory-size iomem 20
clock timezone CET 1
network-clock-participate wic 0
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.2.202.1 10.2.202.49
ip dhcp excluded-address 10.2.202.70 10.2.202.254
!
ip dhcp pool local
network 10.2.202.0 255.255.255.0
option 150 ip 10.2.202.1
default-router 10.2.202.1
!
!
no ip domain lookup
ip multicast-routing
!
isdn switch-type primary-net5
!
voice-card 0
no dspfarm
dsp services dspfarm
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
!
!
!
!
!
!
!
!
!
!
voice translation-rule 10
rule 1 /^331322\(3...\)/ /\1/
!
voice translation-rule 20
rule 1 /^3.../ /331322\0/
!
voice translation-rule 30
rule 1 /^1.../ /001212222\0/
rule 2 /^2.../ /001617522\0/
!
!
voice translation-profile 4digit
translate called 30
!
voice translation-profile in
translate called 10
!
voice translation-profile out
translate calling 20
!
!
!
!
!
!
controller E1 0/0/0
pri-group timeslots 1-3,16
!
!
! !
!
interface Loopback0
ip address 172.2.102.1 255.255.255.255
ip ospf network point-to-point
h323-gateway voip interface
h323-gateway voip id CCM ipaddr 172.2.100.1 1719
h323-gateway voip h323-id Pod12-BR2-RTR
h323-gateway voip bind srcaddr 172.2.102.1
!
interface FastEthernet0/0
ip address 10.2.102.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/0.220
encapsulation dot1Q 220
ip address 10.2.202.1 255.255.255.0
no snmp trap link-status
!
interface Service-Engine0/0
ip unnumbered FastEthernet0/0.220
service-module ip address 10.2.202.2 255.255.255.0
service-module ip default-gateway 10.2.202.1
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0:15
no ip address
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bchan-number-order ascending
isdn outgoing display-ie
isdn outgoing ie redirecting-number
no cdp enable
!
interface Serial0/1/0
no ip address
encapsulation frame-relay IETF
frame-relay traffic-shaping
frame-relay lmi-type ansi
! interface Serial0/1/0.1 point-to-point
ip ospf mtu-ignore
frame-relay interface-dlci 102 ppp Virtual-Template1
!
interface Virtual-Template1
ip address 162.2.102.2 255.255.255.0
ip pim dense-mode
ppp multilink
ppp multilink fragment delay 10
ppp multilink interleave
!
router ospf 1
log-adjacency-changes
network 10.2.102.0 0.0.0.255 area 0
network 10.2.202.0 0.0.0.255 area 0
network 162.2.102.0 0.0.0.255 area 0
network 172.2.102.0 0.0.0.255 area 0
!
ip classless
ip route 10.2.202.2 255.255.255.255 Service-Engine0/0
!
!
ip http server
ip http authentication local
no ip http secure-server
!
!
map-class frame-relay BR2
frame-relay cir 729600
frame-relay bc 7296
frame-relay be 0
frame-relay mincir 729600
frame-relay ip rtp priority 16384 16383 120
frame-relay fair-queue
!
!
!
tftp-server flash:P00307010100.bin
tftp-server flash:P00303020214.bin
tftp-server flash:P00305000301.sbn
tftp-server flash:P00403020214.bin
tftp-server flash:P00307020200.bin
tftp-server flash:P00307020200.loads
tftp-server flash:P00307020200.sb2
tftp-server flash:P00307020200.sbn
tftp-server flash:P00307020400.bin
tftp-server flash:P00307020400.loads
tftp-server flash:P00307020400.sb2
tftp-server flash:P00307020400.sbn
!
control-plane
!
!
!
voice-port 0/0/0:15
translation-profile incoming in
translation-profile outgoing out
!
!
!
!
dial-peer cor custom
name pt-911
name pt-local
name pt-ld
name pt-intl
name pt-internal
!
! dial-peer cor list css-911
member pt-911
!
dial-peer cor list css-local
member pt-local
!
dial-peer cor list css-ld
member pt-ld
!
dial-peer cor list css-intl
member pt-intl
!
dial-peer cor list css-internal
member pt-internal
!
dial-peer cor list css-all
member pt-911
member pt-local
member pt-ld
member pt-intl
member pt-internal
!
dial-peer cor list css-911local
member pt-911
member pt-local
member pt-internal
!
!
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
!
dial-peer voice 911 pots
corlist outgoing css-911
destination-pattern 999
no digit-strip
port 0/0/0:15
!
dial-peer voice 9911 pots
corlist outgoing css-911
destination-pattern 9999
port 0/0/0:15
prefix 999
!
dial-peer voice 7 pots
corlist outgoing css-local
destination-pattern 9[1-9]......$
port 0/0/0:15
!
dial-peer voice 11 pots
corlist outgoing css-ld
destination-pattern 90331[2-9]......$
port 0/0/0:15
prefix 331
!
dial-peer voice 110 pots
corlist outgoing css-intl
destination-pattern 900T
port 0/0/0:15
prefix 00
!
dial-peer voice 1000 pots
corlist outgoing css-internal
translation-profile outgoing 4digit
destination-pattern [12]...$
port 0/0/0:15
!
dial-peer voice 1001 voip
destination-pattern [12]...$
session target ras
incoming called-number 3...
tech-prefix 1#
dtmf-relay h245-alphanumeric
ip qos dscp cs3 signaling
no vad
!
dial-peer voice 3600 voip
destination-pattern 3[126]00
session protocol sipv2
session target ipv4:10.2.202.2
incoming called-number 399[89]....
dtmf-relay sip-notify
codec g711ulaw
ip qos dscp cs3 signaling
no vad
!
gateway
!
!
!
!
gatekeeper
shutdown
!
!
telephony-service
load 7910 P00403020214
load 7960-7940 P00307020400
max-ephones 10
max-dn 10
ip source-address 10.2.202.1 port 2000
auto assign 1 to 4
system message Your current options
sdspfarm units 1
sdspfarm transcode sessions 2
time-zone 23
create cnf-files version-stamp 7960 Mar 28 2009 18:14:36
voicemail 3600
max-conferences 3 gain -6
call-forward pattern .T
moh music-on-hold.au
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .T
!
!
ephone-template 1
softkeys idle Redial Newcall Cfwdall
!
!
ephone-dn 1 dual-line
number 3001 no-reg both
description 3313223001
name br2ph1
call-forward busy 3600
call-forward noan 3600 timeout 12
corlist incoming css-911local
!
!
ephone-dn 2 dual-line
number 3002 no-reg both
description 3313223002
name br2ph2
call-forward busy 3600
call-forward noan 3600 timeout 12
corlist incoming css-all
! !
ephone-dn 3 dual-line
number 3003 no-reg both
description 3313223003
name br2ph3
call-forward busy 3600
call-forward noan 3600 timeout 12
corlist incoming css-all
!
!
ephone-dn 4 dual-line
number 3004 no-reg both
description 3313223004
name br2ph4
call-forward busy 3600
call-forward noan 3600 timeout 12
corlist incoming css-all
!
!
ephone 1
description br1ph1
ephone-template 1
username "br1ph1"
mac-address 0011.BBE0.5775
button 1:1
pin 12345
!
!
!
ephone 2
description br1ph2
ephone-template 1
username "br1ph2"
mac-address 0011.BBEF.6901
button 1:2
pin 12345
!
!
!
ephone 3
description br1ph3
ephone-template 1
username "br1ph3"
mac-address 0014.1C48.DE16
button 1:3
pin 12345
!
!
!
ephone 4
description br1ph4
ephone-template 1
username "br1ph4"
mac-address 0015.2B17.98F7
button 1:4
pin 12345
!
!
ephone-hunt 1 peer
pilot 3210
no-reg both
!
!
!
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line 194 no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
transport preferred none
transport input telnet
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
no login
transport preferred none
transport input telnet
!
warm-reboot
scheduler allocate 20000 1000
ntp clock-period 17179637
ntp update-calendar
ntp server 10.2.200.3
!
end
Cliff McGlamry wrote:
Chris,
If you want it to register as a gateway, add the following into your
CME config:
voice service voip
allow h323 to h323
allow h323 to sip
That will fix it for you.
Cliff
----- Original Message ----- From: "Chris Parker" <[email protected]>
To: "OSL Group" <[email protected]>
Sent: Saturday, March 28, 2009 1:17 PM
Subject: [OSL | CCIE_Voice] CME GK GW Type
When I register CME to a GK it registers as a type of H323-GW:
Pod12-HQ-RTR#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name
Type Flags
--------------- ----- --------------- ----- ---------
---- -----
172.2.102.1 1720 172.2.102.1 54748 CCM H323-GW
I have a requirement for it ro register as a VOIP-GW. Is this possible
or is it a typo in my lab scenario?
Chris
