It indeed is a typo. I just made further research and it should be something like this I check the clock source options on the CVOICE book Third Edition
thanks you very much for Internal Clock: 1. controller T1 1/0 framing crc4 linecoding hdb3 clock source internal ds0-group timeslots 1-15 type e&m-wink-start for External Clock 2. controller T1 1/0 framing esf linecoding ami clock source line ds0-group timeslots 1-12 type e&m-wink-start 2009/4/4 Cliff McGlamry <cl...@mcglamry.net> > Cristobal, > > What document did these come from? I think the example has a typo, but I'd > like to see the original doc. > > Can you put up a link? > > Cliff > > > ----- Original Message ----- > *From:* Cristobal Priego <cristobalpri...@gmail.com> > *To:* OSL Group <ccie_voice@onlinestudylist.com> ; > cristobalpri...@gmail.com > *Sent:* Saturday, April 04, 2009 1:53 PM > *Subject:* [OSL | CCIE_Voice] Internal Clock Source on a T1 CAS > > Hello, > > I have a question on the internal timing source. I am reading that when you > issue the following command under controller interface mode "clock source > internal", the clock is provided by the local PLL. however on these 2 > configuration examples I didn't understand why on the First one the clock is > provided by the local PLL and on the Second Example the clock is provider by > the PSTN/CO PLL > > 1. controller T1 1/0 > framing crc4 > linecoding hdb3 > clock source internal > ds0-group timeslots 1-15 type e&m-wink-start > > 2. controller T1 1/0 > framing esf > linecoding ami > clock source internal > ds0-group timeslots 1-12 type e&m-wink-start > > the only difference is the framing and the linecoding. Do These 2 > parameters define the clocking source for the line? > > thanks > > Cris > >