Still looking answers for,
  MWI for broadcast messages in Unity
  Find the cause for delay between CUE and Unity
  How to add USbms mailbox in PDL (doc says use exchange tools)

Prerequition: Make sure VPIM works between Unity and CUE.
Limitations ( or how I can call this?):
  . Only through PDL is possible (to CUE) and one subscriber per location.
  . Broadcast message is the first message to be played as soon as
accing the VM before even message summary.
  . MWI will not be on for broadcast messages
  . To enable MWI for broadcast messages in CUE
      voicemail broadcast mwi
  . To enable MWI for broadcast messages in Unity
      <Tried hard, couldn't find the solution. Someone please tell me>

Issue:
 Message from CUE to Unity takes lot of time (sometimes 10 min) though
regular VPIM messages comes less than a minute. Not sure why.

Ref:
 
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/administration/guide/ex/sag_0045.html#wp1331441
 
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/networking/guide/ex/net0555.html#wp1057374

Unity to CME:
 . Create unity subscriber with VPIM subscriber type with the number
configured in "broadcast vpim-id" under unity location configured in
CUE. Not for individual CUE subscriber or CUE location id.

network location id "852"  <<< CUE Location
 email domain 192.168.21.6
 name "CUE"
 voicemail broadcast vpim-id 4000  <<< Created a VPIM subscriber in
Unity with 4000 not 852
 end location

 . Create a PDL with any extention (may be 8888) and add the VPIM
subscriber created above. Also add HQ subscribers if you want send
them as well.
 . Create a Call handler with extention (may be 8889) and send it to
"Broadcast Message Administrator" after the greeting. Cisco recoments
to use blank greeting for this CH.
 . Enable HQ Ph1 to send broadcast message to local and reomte
locations. In the HQ Ph1 (2001) subscriber page > Feature > Select
"Subscriber can send broadcast messages to subscribers on multiple
servers"
 . Create a CTP RP in CCM for 8889 and fwd all to VM.

 Sending Message: Call 8889 from 2001 and login with ext and pin.
Press 2 to other location or list and press 2 send to PDL. Record your
message and send it.

CME to CUE:
 . Configure "broadcast vpim-id" under unity location

network location id "408"
 email domain d-405-e2k.cisco.com
 name "Unity"
 voicemail broadcast vpim-id 2000
 end location

network location id "852"
 email domain 192.168.21.6
 name "CUE"
 voicemail broadcast vpim-id 4000  <<< Created a VPIM subscriber in Unity
 end location

network local location id 852

 . Configure a call-in number (my case 4446) with privilage
"broadcast". Make CME phone 1 (4001) as member for this group.

groupname ManagePrompts create
groupname ManagePrompts owner phone1
groupname ManagePrompts privilege ManagePrompts
groupname ManagePrompts privilege broadcast
!
ccn trigger sip phonenumber 4446
 application "promptmgmt"
 enabled
 maxsessions 1
 end trigger

 Sending Message: Call 4446 from 4001, login with ext and pin. Dial 3
to select broadcast menu. Select 2 to send other locations. Select 1
to send all locations. Record your message and send.

Reply via email to