Hi there Sean,

The "Bandwidth" statement used on interfaces is for reference bandwidth for EIGRP and some other protocols, but is only for reference purposes.

Check this link:-
http://www.cisco.com/en/US/docs/ios/12_2/interface/command/reference/irfacces.html#wp1120696

The one that counts on MQC is the bandwidth statement in the policy-map.

LH

sean hurricane wrote:
I think paranoia is getting the best of me but i need a sanity check
when configuring WAN QOS, is bandwidth statement required on the interface? i have always used bandwidth statement even in production but the exam is another beast. Just checked SRND and bandwidth statement wasn't used, also looked at ipexpert solutions and no bandwidth statement. So my question is, is bandwidth statement required on the interface for MQC and legacy shaping? . On Wed, Apr 8, 2009 at 11:06 PM, <[email protected] <mailto:[email protected]>> wrote:

    Send CCIE_Voice mailing list submissions to
           [email protected]
    <mailto:[email protected]>

    To subscribe or unsubscribe via the World Wide Web, visit
           http://onlinestudylist.com/mailman/listinfo/ccie_voice
    or, via email, send a message with subject or body 'help' to
           [email protected]
    <mailto:[email protected]>

    You can reach the person managing the list at
           [email protected]
    <mailto:[email protected]>

    When replying, please edit your Subject line so it is more specific
    than "Re: Contents of CCIE_Voice digest..."


    Today's Topics:

      1. Re: Off topic: Cisco UCM 7.x versus Microsoft     OCS R2
         (Nara Shikamaru)
      2. Re: Off topic: Cisco UCM 7.x versus Microsoft OCS R2
         (Chris Parker)
      3. Re: Off topic: Cisco UCM 7.x versus MicrosoftOCS  R2
         (Cliff McGlamry)
      4. ISDN Q931 shows Cause i = 0x80A9 - Temporary      failure (H.323
         Gateway) (Jarrod Phelps)


    ----------------------------------------------------------------------

    Message: 1
    Date: Wed, 8 Apr 2009 14:34:57 -0700
    From: Nara Shikamaru <[email protected]
    <mailto:[email protected]>>
    Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus
           Microsoft       OCS R2
    To: Mark Davis <[email protected] <mailto:[email protected]>>
    Cc: "[email protected]
    <mailto:[email protected]>"
    <[email protected]
    <mailto:[email protected]>>,
           Michael Ciarfello <[email protected]
    <mailto:[email protected]>>
    Message-ID:
<[email protected]
    <mailto:[email protected]>>
    Content-Type: text/plain; charset="iso-8859-1"

    I've been asking about OCS myself.  Currently I am working in a CUCM 6
    environment and I am of the oppinion that a platform can't be
    taken too
    seriously unless it has a strong call center product.  I've asked
    around to
    see if MS has one but no one has been able to tell me.

    On Wed, Apr 8, 2009 at 1:30 PM, Mark Davis <[email protected]
    <mailto:[email protected]>> wrote:

    > Michael,
    >
    > I hear you and agree.
    >
    > After speaking with my CIO (who just got back from his koolaid
    fest at
    > Redmond), his interest isn't in length of time a company has worked
    > with a product. In his view, of course a Microsoft with 3 years of
    > experience can't compete with a Cisco of 10 years, in the sense
    of how
    > many features the product may have or how polished it may be.
    >
    > The most important aspect is cost and functionality. He has
    tasked me
    > to list the "must have" features UCM has that we use, and some "nice
    > to haves" that would come with version 7.x that we could
    implement in
    > 6 months or less. Then I'll need to see how it compares with the
    > features OCS has.
    >
    > Looks like I'll be labbing up OCS R2 over the weekend and
    reading some
    > white papers. I'm going to do as you suggest and get some answers on
    > hardware supportability. I'd also like to see the product in action,
    > both at Microsoft's southeastern regional office in North Carolina,
    > and at a customer's site.
    >
    > On Tue, Apr 7, 2009 at 9:24 PM, Michael Ciarfello
    > <[email protected] <mailto:[email protected]>> wrote:
    > > A mature product with 8+ years of experience and companies
    that have many
    > tens of thousands of endpoints on some of the largest companies
    in the world
    > vs a new technology that just came out.
    > >
    > > You need to ask questions on supportability (how is MS supporting
    > hardware phones, gateways, trunks, etc.)  Is MS using other
    vendors products
    > for these?  Not everyone is just going to use IM and their phone
    as their
    > voice communications as much as MS wants to get rid fo the desk
    phone.
    > >
    > > End-user acceptance.  What applications in OCS are end-users
    really going
    > to use. If mostly just dial-tone then you know what to evaluate.
    > >
    > > References.  What installs does MS have?
    > >
    > > ________________________________________
    > > From: [email protected]
    <mailto:[email protected]> [
    > [email protected]
    <mailto:[email protected]>] On Behalf Of Mark
    Davis [
    > [email protected] <mailto:[email protected]>]
    > > Sent: Tuesday, April 07, 2009 10:05 AM
    > > To: [email protected]
    <mailto:[email protected]>
    > > Subject: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus
    Microsoft OCS
    > R2
    > >
    > > I know this is off topic but I hope the moderators will allow this
    > > question... to the engineers here that may be familiar with both
    > > products, how do they stack up against each other? How do they
    > > compare?
    > >
    > > I've been tasked to go on a fact finding mission on both
    products by
    > > my CIO. Given my background, I'm biased towards UCM 7.x, but
    we are
    > > going to demo both. I'm not at all familiar with OCS. I'm also
    burning
    > > up google and I thought I'd ask the group here in case anyone
    had any
    > > particular insights on this.
    > >
    > > Thanks!
    > >
    >



    --
    -Shikamaru
    -------------- next part --------------
    An HTML attachment was scrubbed...
    URL:
    
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090408/1411f921/attachment-0001.htm

    ------------------------------

    Message: 2
    Date: Wed, 08 Apr 2009 18:46:57 -0400
    From: Chris Parker <[email protected] <mailto:[email protected]>>
    Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus
           Microsoft OCS R2
    To: Azmat Marwat <[email protected]
    <mailto:[email protected]>>
    Cc: "[email protected]
    <mailto:[email protected]>"
    <[email protected]
    <mailto:[email protected]>>,
           Michael Ciarfello <[email protected]
    <mailto:[email protected]>>
    Message-ID: <[email protected]
    <mailto:[email protected]>>
    Content-Type: text/plain; charset=ISO-8859-1; format=flowed


    Personally I am waiting for Apple / ATT to announce their Unified PBX
    for the iPhone ... Goodbye desk phones .... :-)

    Azmat Marwat wrote:
    > Microsoft and Cisco are going to be major players in the Unified
    > Communicatioins field.
    >
    > Microsoft claims that their UC product is superior with respect to
    > cost, integration and ROI, and that true Unified Communications is
    > only theirs, while its competitors are just renaming their
    products to
    > incluse the words 'Unified Communications', for example from 'Cisco
    > CallManager' to 'Cisco Unified Communications Manager'.
    >
    >
    > Regards,
    >
    > Azmat Khan
    > Telecommunications Specialist
    >
    >
    >
    >
    > On Wed, Apr 8, 2009 at 4:30 PM, Mark Davis
    <[email protected] <mailto:[email protected]>
    > <mailto:[email protected] <mailto:[email protected]>>>
    wrote:
    >
    >     Michael,
    >
    >     I hear you and agree.
    >
    >     After speaking with my CIO (who just got back from his
    koolaid fest at
    >     Redmond), his interest isn't in length of time a company has
    worked
    >     with a product. In his view, of course a Microsoft with 3
    years of
    >     experience can't compete with a Cisco of 10 years, in the
    sense of how
    >     many features the product may have or how polished it may be.
    >
    >     The most important aspect is cost and functionality. He has
    tasked me
    >     to list the "must have" features UCM has that we use, and
    some "nice
    >     to haves" that would come with version 7.x that we could
    implement in
    >     6 months or less. Then I'll need to see how it compares with the
    >     features OCS has.
    >
    >     Looks like I'll be labbing up OCS R2 over the weekend and
    reading some
    >     white papers. I'm going to do as you suggest and get some
    answers on
    >     hardware supportability. I'd also like to see the product in
    action,
    >     both at Microsoft's southeastern regional office in North
    Carolina,
    >     and at a customer's site.
    >
    >     On Tue, Apr 7, 2009 at 9:24 PM, Michael Ciarfello
    >     <[email protected] <mailto:[email protected]>
    <mailto:[email protected] <mailto:[email protected]>>>
    wrote:
    >     > A mature product with 8+ years of experience and companies
    that
    >     have many tens of thousands of endpoints on some of the largest
    >     companies in the world vs a new technology that just came out.
    >     >
    >     > You need to ask questions on supportability (how is MS
    >     supporting hardware phones, gateways, trunks, etc.)  Is MS using
    >     other vendors products for these?  Not everyone is just going to
    >     use IM and their phone as their voice communications as much
    as MS
    >     wants to get rid fo the desk phone.
    >     >
    >     > End-user acceptance.  What applications in OCS are end-users
    >     really going to use. If mostly just dial-tone then you know what
    >     to evaluate.
    >     >
    >     > References.  What installs does MS have?
    >     >
    >     > ________________________________________
    >     > From: [email protected]
    <mailto:[email protected]>
    >     <mailto:[email protected]
    <mailto:[email protected]>>
    >     [[email protected]
    <mailto:[email protected]>
    >     <mailto:[email protected]
    <mailto:[email protected]>>] On Behalf Of Mark
    >     Davis [[email protected] <mailto:[email protected]>
    <mailto:[email protected] <mailto:[email protected]>>]
    >     > Sent: Tuesday, April 07, 2009 10:05 AM
    >     > To: [email protected]
    <mailto:[email protected]>
    >     <mailto:[email protected]
    <mailto:[email protected]>>
    >     > Subject: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus
    >     Microsoft OCS R2
    >     >
    >     > I know this is off topic but I hope the moderators will
    allow this
    >     > question... to the engineers here that may be familiar
    with both
    >     > products, how do they stack up against each other? How do they
    >     > compare?
    >     >
    >     > I've been tasked to go on a fact finding mission on both
    products by
    >     > my CIO. Given my background, I'm biased towards UCM 7.x,
    but we are
    >     > going to demo both. I'm not at all familiar with OCS. I'm also
    >     burning
    >     > up google and I thought I'd ask the group here in case anyone
    >     had any
    >     > particular insights on this.
    >     >
    >     > Thanks!
    >     >
    >
    >



    ------------------------------

    Message: 3
    Date: Wed, 8 Apr 2009 21:06:34 -0400
    From: "Cliff McGlamry" <[email protected]
    <mailto:[email protected]>>
    Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus
           MicrosoftOCS    R2
    To: "Nara Shikamaru" <[email protected]
    <mailto:[email protected]>>,   "Mark Davis"
           <[email protected] <mailto:[email protected]>>
    Cc: [email protected]
    <mailto:[email protected]>, Michael Ciarfello
           <[email protected] <mailto:[email protected]>>
    Message-ID: <[email protected]
    <mailto:[email protected]>>
    Content-Type: text/plain; charset="iso-8859-1"

    Of course they have one.  It's a hidden feature in Microsoft
    Exchange.  Callers to the ACD are delivered directly to your e
    mail box.

     ----- Original Message -----
     From: Nara Shikamaru
     To: Mark Davis
     Cc: [email protected]
    <mailto:[email protected]> ; Michael Ciarfello
     Sent: Wednesday, April 08, 2009 5:34 PM
     Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus
    MicrosoftOCS R2


     I've been asking about OCS myself.  Currently I am working in a
    CUCM 6 environment and I am of the oppinion that a platform can't
    be taken too seriously unless it has a strong call center product.
     I've asked around to see if MS has one but no one has been able
    to tell me.


     On Wed, Apr 8, 2009 at 1:30 PM, Mark Davis <[email protected]
    <mailto:[email protected]>> wrote:

       Michael,

       I hear you and agree.

       After speaking with my CIO (who just got back from his koolaid
    fest at
       Redmond), his interest isn't in length of time a company has worked
       with a product. In his view, of course a Microsoft with 3 years of
       experience can't compete with a Cisco of 10 years, in the sense
    of how
       many features the product may have or how polished it may be.

       The most important aspect is cost and functionality. He has
    tasked me
       to list the "must have" features UCM has that we use, and some
    "nice
       to haves" that would come with version 7.x that we could
    implement in
       6 months or less. Then I'll need to see how it compares with the
       features OCS has.

       Looks like I'll be labbing up OCS R2 over the weekend and
    reading some
       white papers. I'm going to do as you suggest and get some
    answers on
       hardware supportability. I'd also like to see the product in
    action,
       both at Microsoft's southeastern regional office in North Carolina,
       and at a customer's site.


       On Tue, Apr 7, 2009 at 9:24 PM, Michael Ciarfello
       <[email protected] <mailto:[email protected]>> wrote:
       > A mature product with 8+ years of experience and companies
    that have many tens of thousands of endpoints on some of the
    largest companies in the world vs a new technology that just came out.
       >
       > You need to ask questions on supportability (how is MS
    supporting hardware phones, gateways, trunks, etc.)  Is MS using
    other vendors products for these?  Not everyone is just going to
    use IM and their phone as their voice communications as much as MS
    wants to get rid fo the desk phone.
       >
       > End-user acceptance.  What applications in OCS are end-users
    really going to use. If mostly just dial-tone then you know what
    to evaluate.
       >
       > References.  What installs does MS have?
       >
       > ________________________________________
       > From: [email protected]
    <mailto:[email protected]>
    [[email protected]
    <mailto:[email protected]>] On Behalf Of Mark
    Davis [[email protected] <mailto:[email protected]>]
       > Sent: Tuesday, April 07, 2009 10:05 AM
       > To: [email protected]
    <mailto:[email protected]>
       > Subject: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus
    Microsoft OCS R2
       >
       > I know this is off topic but I hope the moderators will allow
    this
       > question... to the engineers here that may be familiar with both
       > products, how do they stack up against each other? How do they
       > compare?
       >
       > I've been tasked to go on a fact finding mission on both
    products by
       > my CIO. Given my background, I'm biased towards UCM 7.x, but
    we are
       > going to demo both. I'm not at all familiar with OCS. I'm
    also burning
       > up google and I thought I'd ask the group here in case anyone
    had any
       > particular insights on this.
       >
       > Thanks!
       >




     --
     -Shikamaru
    -------------- next part --------------
    An HTML attachment was scrubbed...
    URL:
    
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090408/3da2d746/attachment-0001.htm

    ------------------------------

    Message: 4
    Date: Wed, 8 Apr 2009 19:11:50 -0700
    From: Jarrod Phelps <[email protected]
    <mailto:[email protected]>>
    Subject: [OSL | CCIE_Voice] ISDN Q931 shows Cause i = 0x80A9 -
           Temporary       failure (H.323 Gateway)
    To: [email protected]
    <mailto:[email protected]>
    Message-ID:
<[email protected]
    <mailto:[email protected]>>
    Content-Type: text/plain; charset="iso-8859-1"

    I'm seeing this error

    *Cause i = 0x80A9 - Temporary failure*

    Call is established then disconnects

    My config is below

    Any help would be great :-)

    Apr  9 02:28:29.924: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8
     callref =
    0x0086
           Bearer Capability i = 0x8090A2
                   Standard = CCITT
                   Transfer Capability = Speech
                   Transfer Mode = Circuit
                   Transfer Rate = 64 kbit/s
           Channel ID i = 0xA98383
                   Exclusive, Channel 3
           Calling Party Number i = 0x2181, '6175292003'
                   Plan:
    Pod19-BR1-RTR#ISDN, Type:National
           Called Party Number i = 0x80, '12122291003'
                   Plan:Unknown, Type:Unknown
    *Apr  9 02:28:29.948: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8
     callref
    = 0x8086
           Channel ID i = 0xA98383
                   Exclusive, Channel 3
    *Apr  9 02:28:29.984: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8
     callref =
    0x8086
           Progress Ind i = 0x8088 - In-band info or appropriate now
    available
    Pod19-BR1-RTR#
    *Apr  9 02:28:31.456: ISDN Se0/0/0:23 Q931: RX <- CONNECT pd = 8
     callref =
    0x8086
           Display i = 'HQ Phone3'
    *Apr  9 02:28:31.456: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now
    connected to 12122291003 N/A
    Pod19-BR1-RTR#
    *Apr  9 02:28:31.460: ISDN Se0/0/0:23 Q931: TX -> CONNECT_ACK pd = 8
    callref = 0x0086
    Pod19-BR1-RTR#
    *Apr  9 02:28:34.044: %ISDN-6-DISCONNECT: Interface Serial0/0/0:2
    disconnected from 12122291003 , call lasted 2 seconds
    Pod19-BR1-RTR#
    *Apr  9 02:28:34.048: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd =
    8  callref
    = 0x0086
          * Cause i = 0x80A9 - Temporary failure*
    *Apr  9 02:28:34.056: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8
     callref =
    0x8086
    *Apr  9 02:28:34.060: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
    callref = 0x0086


    Config

    network-clock-participate wic 0
    network-clock-select 1 T1 0/0/0
    !
    isdn switch-type primary-ni
    !
    voice service voip
     allow-connections h323 to h323
     h323
    !
    voice class codec 1
     codec preference 1 g729r8
    !
    voice class h323 1
     h225 timeout tcp establish 3
     h225 timeout setup 3
    !
    voice translation-rule 1
     rule 1 /^617529\(2...$\)/ /\1/
    !
    !
    voice translation-profile ANI
     translate called 1
    !
    controller T1 0/0/0
     framing esf
     linecode b8zs
     pri-group timeslots 1-3,24
    !
    interface Loopback0
     ip address 172.9.101.1 255.255.255.255
     ip ospf network point-to-point
     h323-gateway voip interface
     h323-gateway voip bind srcaddr 172.9.101.1
    !
    interface Serial0/0/0:23
     no ip address
     isdn switch-type primary-ni
     isdn incoming-voice voice
     no cdp enable
    !
    voice-port 0/0/0:23
     translation-profile incoming ANI
    !
    dial-peer voice 100 voip
     voice-class codec 1
     voice-class h323 1
     incoming called-number .
     dtmf-relay h245-alphanumeric
     no vad
    !
    dial-peer voice 101 voip
     destination-pattern 2...$
     voice-class codec 1
     voice-class h323 1
     session target ipv4:10.9.200.20
     dtmf-relay h245-alphanumeric
     no vad
    !
    dial-peer voice 102 voip
     preference 1
     destination-pattern 2...$
     voice-class codec 1
     voice-class h323 1
     session target ipv4:10.9.200.21
     dtmf-relay h245-alphanumeric
     no vad
    !
    dial-peer voice 1000 pots
     destination-pattern 911
     port 0/0/0:23
     forward-digits 3
    !
    dial-peer voice 200 pots
     incoming called-number .
     direct-inward-dial
    !
    dial-peer voice 1001 pots
     destination-pattern 1.........
     port 0/0/0:23
     forward-digits 11
    -------------- next part --------------
    An HTML attachment was scrubbed...
    URL:
    
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090408/c3c4d3f2/attachment.htm

    ------------------------------

    _______________________________________________
    CCIE_Voice mailing list
    [email protected] <mailto:[email protected]>
    http://onlinestudylist.com/mailman/listinfo/ccie_voice


    End of CCIE_Voice Digest, Vol 38, Issue 59
    ******************************************



Reply via email to