Tyson,
I did see the video, but there is no mention of how long would the revert function/script takes (ucm servers or the whole pod). The web control page states that should take up to 15 min to get the servers blanked. I don't actually know what process you are running in the background to revert the ucm servers... There is a mention in the video of how long the load process takes, about 35 min (25 min pub + 10 min sub), similar to the statement the web control page makes, 35-40 min. These times does not match what I'm getting in the actual sessions, Thanks!, Otto ________________________________ From: Tyson Scott [mailto:[email protected]] Sent: Lunes, 13 de Abril de 2009 10:22 p.m. To: Otto Sanchez; [email protected] Subject: RE: [OSL | CCIE_Voice] BP3 Voice Vrack Issues Otto, Although the Cisco Documentation talks about how to do a disaster recovery it doesn't talk about the time it takes to do disaster recovery... But I can tell you the time tables you are seeing are expected behavior for this process. I believe Mark speaks about the time it takes in the demo video on ProctorLabs, did you watch the demo? Regards, Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. From: [email protected] [mailto:[email protected]] On Behalf Of Otto Sanchez Sent: Monday, April 13, 2009 6:59 PM To: [email protected] Subject: [OSL | CCIE_Voice] BP3 Voice Vrack Issues I'm running into the following issues when working with bp3 voice vracks (I always get the pod32): 1.- The "Revert entire pod" button in the web control page does not revert all servers/routers/switch, 2.- Load lab configs for the ucm pub-sub takes more than 40 min, sometimes it takes about 75 to 90 min to get done at 100% 3.- The revert individual control for the servers section (in web control page) takes more than 15 min to complete, (I have got errors later if I try to load a server config, sometimes after waiting about 30 min, which makes me suppose the revert is not completed). It would be nice if we know the revert status to immediatelly proceed to load the config 4.- "error" appears when try to load labs config, usually with the CUCM-PUB/SUB row, Could someone at IPExpert give some advice?, Help appreciated!, Otto
