There could be couple of things, to start with check if your CCM group have both PUB and SUB preset in it. Regarding Ephone-dn registering to the GK, reload you gateway, that will fix the issue.
From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of adefila seun Sent: Wednesday, 22 April 2009 9:06 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] GATEKEEPER REGISTRTION Hi, i registered the publisher and subscriber to the gatekeeper. Created the gatekeeper on the callmanager followed by a trunk. on issuing sh gatekeeper endpoint, it show just the publisher as ben registered. Anyone with an idea of what could be wrong Also am not suppose to register the E.164 of branch 2 router, which i did earlier and could not issue zone prefix command After doing no-reg on all the ephone-dns and no gateway gateway the gatekeeper still shows the E.164 Any ideas? thanks ________________________________ CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact Getronics Australia immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not Getronics Australia. While we endeavour to protect our network from computer viruses, Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.