Hi Michael, Can u give more inputs reg turning IVR off via config-register? Haven't heard abt this before, sounds interesting.
Yes the Red light does come on and goes off perfectly fine. I was able to make/receive calls to/from ata phone. ATA is not reachable now can't change the software image...:( I did shake it, opened the box and tried pressing the little button but no good.....:( --- On Sun, 5/3/09, Michael Ciarfello <mciarfe...@iplogic.com> wrote: From: Michael Ciarfello <mciarfe...@iplogic.com> Subject: RE: [OSL | CCIE_Voice] ATA IVR not responding To: "kapil atrish" <nice_cha...@yahoo.com>, "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Date: Sunday, May 3, 2009, 9:00 AM #yiv1591233982 P { MARGIN-TOP:0px;MARGIN-BOTTOM:0px;} Can you turn the IVR off via a config register? Might be disabled. When you pick up the phone does the red light come on? Try the factoryreset thingie. Try re-loading the software image. Try shaking it. (lol. just kidding) From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of kapil atrish [nice_cha...@yahoo.com] Sent: Saturday, May 02, 2009 11:31 PM To: ccie_voice@onlinestudylist.com; Cliff McGlamry Subject: Re: [OSL | CCIE_Voice] ATA IVR not responding Yes, that's what I am trying to invoke the IVR but no response. I've changed the cable, Phone, Phone port, removed lan cable and tried whole thing again but no good. --- On Sat, 5/2/09, Cliff McGlamry <cl...@mcglamry.net> wrote: From: Cliff McGlamry <cl...@mcglamry.net> Subject: Re: [OSL | CCIE_Voice] ATA IVR not responding To: "kapil atrish" <nice_cha...@yahoo.com>, ccie_voice@onlinestudylist.com Date: Saturday, May 2, 2009, 11:30 PM Did you push the button on top of the ATA after picking up the phone on port 1? That's how you activate the IVR menu. What exactly have you done? ----- Original Message ----- From: kapil atrish To: ccie_voice@onlinestudylist.com Sent: Saturday, May 02, 2009 8:25 AM Subject: [OSL | CCIE_Voice] ATA IVR not responding Hi list, M not able to access the IVR menu on ATA.I know it should work on Phone 1 port, no success on any of the port. Reboot didn't help. Removed lan cable and tried, no success. Checked physical layer stuff. Has anyone had this issue earlier and any troubleshooting I can do??? M running SCCP image on it. I was testing the ATA vlan stuff and put in a Vlan and OpFlag which made my ATA unreachable. Now I don't have a switch to configure in the specific vlan and access my ATA. Since IVR is not working I am not even able to revert the ATA settings. Thanks in advance...