Any special way to create the VM server to tweak the Cisco install to install the application.
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com] Sent: Friday, May 29, 2009 9:52 AM To: Thaya Nagarajah Cc: ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] V3 : list of equipements and sotware required There are none. It should just install—UCCX Also. I am using VMWare Workstation, I put 2GB ram, 200GB hard disk (don’t allocate all now,) Not at home to determine the SCSI controller type (it WAS SCSI though.) From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Thaya Nagarajah Sent: Friday, May 29, 2009 9:14 AM To: Tech Guy; anil batra; Larry Hadrava Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] V3 : list of equipements and sotware required Hi, I am trying to install CUCM, CUPS, CUC, MPE and UCCX in a VMWare platform. I did try to install in ESX and VMWare2.0. I managed to install CUCM and UCCX. Installation of CUPS, MPE and CUC are failing with “unrecoverable error”, could you please forward me any links for list of steps I should follow to install these applications. Thank you, Thaya N From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Tech Guy Sent: Wednesday, May 27, 2009 11:48 PM To: anil batra; Larry Hadrava Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] V3 : list of equipements and sotware required I think that should be fine; I am using DL380 G4 2x3.6GHz CPU;12GB RAM & 300GB HDD for 6 servers (CUCM-Pub,CUCM-Sub,CUPS,CUC,CUCCX&Win2k3AD) Tech Guy ----- Original Message ----- From: anil batra<mailto:anil...@yahoo.com> To: Larry Hadrava<mailto:lar...@ipexpert.com> Cc: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com> Sent: Wednesday, May 27, 2009 12:15 AM Subject: Re: [OSL | CCIE_Voice] V3 : list of equipements and sotware required Larry- Do think DL 380 G4 server with Daul CPU,16GB RAM and 2 Hard Drive will be good enough for all 4 Servers(CUCM, CUPS, Unity connection and UCCX) using VMware. Also where from can I get the CUPS, UCCX and Unity Connection SW I do have CUCM 7X please. Thanks, Anil --- On Wed, 5/27/09, anil batra <anil...@yahoo.com<mailto:anil...@yahoo.com>> wrote: From: anil batra <anil...@yahoo.com<mailto:anil...@yahoo.com>> Subject: Re: [OSL | CCIE_Voice] V3 : list of equipements and sotware required To: "Larry Hadrava" <lar...@ipexpert.com> Cc: ccie_voice@onlinestudylist.com Date: Wednesday, May 27, 2009, 9:28 AM Thanks Larry for your kind inputs. --- On Wed, 5/27/09, Larry Hadrava <lar...@ipexpert.com> wrote: From: Larry Hadrava <lar...@ipexpert.com> Subject: Re: [OSL | CCIE_Voice] V3 : list of equipements and sotware required To: "anil batra" <anil...@yahoo.com> Cc: ccie_voice@onlinestudylist.com Date: Wednesday, May 27, 2009, 4:13 AM Anil: Please check this link for the official Cisco V3 blueprint equipment and Software version list: https://cisco.hosted.jivesoftware.com/docs/DOC-3641 Many people use VMware to run the servers. Check out the archives for more information about VMware setup and requirements. eBay is a fairly good source for the other hardware. Of course remote rack rental is very reasonable and a good option as well. Lets say that you are looking to take the lab next March. If Cisco added something new to the lab, if using rental racks you would have access to the changed equipment / IOS versions, etc. without any work or cost from your end. HTH Larry Hadrava CCIE #12203 CCNP CCNA Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com<http://www.ipexpert.com/> On Tue, May 26, 2009 at 1:19 AM, anil batra <anil...@yahoo.com<http://us.mc379.mail.yahoo.com/mc/compose?to=anil...@yahoo.com>> wrote: Hello Friends, I am trying to build my home Voice IE lab for V3. Could someone suggest what's will be list of equipements and sotwares required. And the best way to get these please. As you know being individual looking for the cheap and best possible way out. Thanks, Anil
