This actually wound up being a bone-headed mistake on my part. I intentionally had upgraded the pub but not the sub. I thought I configured DHCP on the pub and had option 150 pointing at the pub. Turns out I forgot I had DHCP running on the router that the SIP phone was connected to and was still pointing to the sub. That's why the SIP phone was getting rejected. After I fixed option 150 to point to the pub the 7960 successfully registered as a SIP phone to the pub running 7.1.2.
I have since rolled back to 7.0, since that is what is on the blueprint, so I didn't spend a lot of time playing with 7.1.2. The only major thing I saw in the short time it was up was that the server pauses during every reboot and makes you accept a disclaimer at the console that it is running on VMWare. Of course I would imagine this isn't an issue on real hardware. The only other minor thing I noticed was the addition of geo locations. -----Original Message----- From: Jonathan Charles [mailto:jonv...@gmail.com] Sent: Tuesday, June 09, 2009 10:13 PM To: Jason Granat Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] CUCM 7.1.2 7960 SIP Registration Rejected Seen anything weird with 7.1? Was debating on upgrading our development gear... just to screw with the UCCX guys.... Jonathan On Sat, Jun 6, 2009 at 10:41 PM, Jason Granat<j...@slash128.com> wrote: > Since it appears the OSL mailer is back online I wanted to share that this > was a simple boneheaded mistake. During my upgrade haste I forgot to reset > my DHCP option 150 and the phones were trying to register with the sub that > had not yet been upgraded. Anyway, I was able to register my 7960 phones as > SIP endpoints with 7.1.2. > Hope my mistake was helpful to someone :-) > > On Jun 6, 2009, at 9:49 AM, Jason Granat wrote: > > I upgraded to CUCM 7.1.2 yesterday and my 7960's that were previously > registered as SIP endpoints in 7.0 are now getting registration rejected. I > tried reverting back to Skinny (which worked) and back to SIP and also tried > adding new 7960's as SIP but still get reg rej. Does anyone know if there is > an incompatibility with 7960's as SIP endpoints in 7.1.2? > > A note on 7.1.2 on VMWare: every reboot the system will pause during the > boot cycle to warn that it detects VMWare and you must agree that it is not > a production system, so you can't just reboot and wait for it to come up. > You have to agree every time. > ________________________________ > > http://slash128.com > > > ________________________________ > > http://slash128.com > http://slash128.com
