Hi , Thanks Karuna for your help. It works now. I don't even need to configure the user or password in CIPC
What about the the HQ Phone 5001, I can see the sipbr2, [email protected] but I can't call it . Reorder tone. I configured a dial peer on HQ dial-p voice 3005 voip destination-pattern 3005 session protocol sipv2 session target ipv4:HQ SIP trunk dtmf-relay rtp-nte codec g711ulaw Route Pattern associated with this trunk is 3XXX, all significant digits. Same error message in debug ccsip mess. Translation debug has 'no profile found in peer 3005 for outgoing '. I checked the pri groups and it matches on both ends with the PSTN router. Thanks for the help 2009/6/26 karuna durai <[email protected]> > configure codec g711ulaw in the dial-peer > > > > 2009/6/26 Voice Guy <[email protected]> > > Hi, >> >> In Lab 4A version 3 , there is a section on a SIP trunk pointing to the >> UCME. >> >> On page 221, I can call 'sipbr2,[email protected]' from 2123945002 - the HQ >> SIP phone. >> >> However, I can't call the HQ SIP phone 5002 from the br2 - 3006 sip >> phone. I get a reorder tone from the br2 sip phone. >> >> I tried creating a user siphq2 with the phone as: [email protected] >> >> >> I also created a dial peer on br2 ( Not sure if this right ) >> >> dial-peer voice 5001 voip >> >> destination-pattern 5... >> >> voice-class codec 1 >> >> session protocol sipv2 >> >> session target ipv4:10.10.210.10 >> >> dtmf-relay rtp-nte >> >> no vad >> >> >> I then typed into CIPC the user and password, siphq2 - cisco. >> >> The debug is show below, it says SIP/2.0 404 Not found, >> >> I am not sure how to go about doing this. >> >> Any help appreciated, thanks. >> >> >> ----------------------------------------------------------------------------------------------------------------------------- >> BR2# debug ccsip mess >> >> INVITE sip:[email protected] <sip%[email protected]> SIP/2.0 >> >> Via: SIP/2.0/UDP 10.10.202.51:5060;branch=z9hG4bK6b1a10a4 >> >> From: "br2 ph 2" <sip:[email protected] <sip%[email protected]> >> >;tag=0023049ab4580034297b98e7-0ba5c948 >> >> To: <sip:[email protected] <sip%[email protected]>> >> >> Call-ID: [email protected] >> >> Max-Forwards: 70 >> >> CSeq: 101 INVITE >> >> User-Agent: Cisco-CP7940G/8.0 >> >> Contact: <sip:[email protected]:5060;user=phone;transport=udp> >> >> Expires: 180 >> >> Accept: application/sdp >> >> Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE >> >> Content-Length: 299 >> >> Content-Type: application/sdp >> >> Content-Disposition: session;handling=optional >> >> v=0 >> >> o=Cisco-SIPUA 4238 0 IN IP4 10.10.202.51 >> >> s=SIP Call >> >> t=0 0 >> >> m=audio 18888 RTP/AVP 0 8 13 18 101 >> >> c=IN IP4 10.10.202.51 >> >> a=rtpmap:0 PCMU/8000 >> >> a=rtpmap:8 PCMA/8000 >> >> a=rtpmap:13 CN/8000 >> >> a=rtpmap:18 G729/8000 >> >> a=fmtp:18 annexb=no >> >> a=rtpmap:101 telephone-event/8000 >> >> a=fmtp:101 0-15 >> >> a=sendrecv >> >> Jun 26 09:45:56.113: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: >> >> Sent: >> >> SIP/2.0 100 Trying >> >> Date: Fri, 26 Jun 2009 09:45:56 GMT >> >> From: "br2 ph 2" <sip:[email protected] <sip%[email protected]> >> >;tag=0023049ab4580034297b98e7-0ba5c948 >> >> Allow-Events: telephone-event >> >> Content-Length: 0 >> >> To: <sip:[email protected] <sip%[email protected]>> >> >> Call-ID: [email protected] >> >> Via: SIP/2.0/UDP 10.10.202.51:5060;branch=z9hG4bK6b1a10a4 >> >> CSeq: 101 INVITE >> >> Server: Cisco-SIPGateway/IOS-12.x >> >> Jun 26 09:45:56.113: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: >> >> Sent: >> >> SIP/2.0 404 Not Found >> >> Reason: Q.850;cause=1 >> >> Date: Fri, 26 Jun 2009 09:45:56 GMT >> >> From: "br2 ph 2" <sip:[email protected] <sip%[email protected]> >> >;tag=0023049ab4580034297b98e7-0ba5c948 >> >> Allow-Events: telephone-event >> >> Content-Length: 0 >> >> To: <sip:[email protected] <sip%[email protected]>>;tag=6A3EDC-201A >> >> Call-ID: [email protected] >> >> Via: SIP/2.0/UDP 10.10.202.51:5060;branch=z9hG4bK6b1a10a4 >> >> CSeq: 101 INVITE >> >> Server: Cisco-SIPGateway/IOS-12.x >> >> Jun 26 09:45:56.261: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: >> >> Received: >> >> ACK sip:[email protected] <sip%[email protected]> SIP/2.0 >> >> Via: SIP/2.0/UDP 10.10.202.51:5060;branch=z9hG4bK6b1a10a4 >> >> From: "br2 ph 2" <sip:[email protected] <sip%[email protected]> >> >;tag=0023049ab4580034297b98e7-0ba5c948 >> >> To: <sip:[email protected] <sip%[email protected]>>;tag=6A3EDC-201A >> >> Call-ID: [email protected] >> >> CSeq: 101 ACK >> >> Content-Length: 0 >> >> >
