That was it! Added username and password and it registered. Thanks a lot, Tim. The 7961 is definitely looking for a SEPxxxxxxxxxxxx.cnf.xml-file in SIP-mode and not for a SIPxxxxxxxxxxxx.cnf-file.
Von: Tim Telkamp [mailto:ttelk...@ctiusa.com] Gesendet: Montag, 06. Juli 2009 15:14 An: GRAFL Philipp; OSL Group Betreff: RE: [OSL | CCIE_Voice] V3: Lab 3A Problem with SIP-Phone Registration I hit the same thing. Since I had "Authenticate Register" under "voice register global" to support X-Lite, the 7941 needed a username/passwiord to authenticate. I added it then did "created profile" and my 7941 registered. Removing "authenticate register" also worked, but then X-Lite broke. The 7940/7960 SIP load seems to behave differently than the 7941/7961 load w.r.t. registration. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of GRAFL Philipp Sent: Monday, July 06, 2009 9:01 AM To: OSL Group Subject: [OSL | CCIE_Voice] V3: Lab 3A Problem with SIP-Phone Registration I am working on lab 3A and have a problem with the SIP endpoint. I have 2 7961 on my CME (I have kicked the 7960 out, because there will be no 7960 in the real lab). One as SCCP-device and one as SIP-device. The SCCP is up and running (no wonder) but the SIP-device will not register. The very odd thing I am seeing is, if I make a "create profile" under voice register global, CME is creating a SEPxxxxxxxxxxxx.cnf.xml file and not a SIPxxxxxxxxxxxx.cnf. I have then created a second SIP-device as a 7960 phone with similar config, then deleted all config files from flash and made again a create profile (I did nothing under telephony-service). I got again a SEPxxxxxxxxxxxx.cnf.xml for the 7961 and, surprise, a SIPyyyyyyyyyyyy.cnf for the 7960! My IOS-version is 12.4.22T1