CCME 7.0(1) What did the phone say?
-----Original Message----- From: Jonathan Charles [mailto:jonv...@gmail.com] Sent: Thursday, July 23, 2009 12:37 AM To: Michael Ciarfello Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Hilarity with CUCME 4.3/7.0 Ub CUCME 4.1 and earlier, there was sw conf... in 4.3, it says, on page 709 of the CUCME7 admin guide: SCCP: Configuring Multi-Party Ad Hoc and Meet-Me Conferencing in Cisco Unified CME 4.1 and Later Versions: Prerequisites * Cisco Unified CME 4.1 or a later version * You must have a PVDM2-8, PVDM2-16, PVDM2-32, or PVDM2-64 high-density packet voice digital signal processor module hosted on the motherboard or on a module such as the NM-HDV2 or NM-HD-2VE. * For Cisco Unified IP Phone 7985, firmware version 4-1-2-0 or a later version I configured it, and tested the old-style, max-conferences command under telephony services and was told no by the phone. My telephony-service version is 7.0(1).... what is yours? Jonathan On Wed, Jul 22, 2009 at 9:46 PM, Michael Ciarfello<mciarfe...@iplogic.com> wrote: > Looks good here. SIP to SIP 3-way conference, SCCP to SCCP and SCCP to/from > SIP. > Also admin guide page 680 Conferencing Overview. > > No software meet-me (never was sw meetme.) > > ________________________________________ > From: ccie_voice-boun...@onlinestudylist.com > [ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jonathan Charles > [jonv...@gmail.com] > Sent: Wednesday, July 22, 2009 7:15 PM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Hilarity with CUCME 4.3/7.0 > > Conferencing, check it out, no ad-hoc software conferencing any more... > > > Jonathan > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com