Try resetting the CUE module from CME ctpresident wrote: > Urgh! Gang, please help!!!!! > > So, I've got a AIM-CUE in my lab (cause the NME-CUE is too expensive) > and the AIM was all I could get my hands on. Problem is - she's not > working. :( > > Well, I'm hoping that she really is working, and that I just don't > know how to get it to work. And after posting here, one of you fine > people will immediately notice what's wrong, have had this issue > before, and point me in the right direction! > > So problem is: when I access the CUE session (service-module > service-Engine 0/1 session), the module is busy rebooting, and goes on > and on into oblivion. Now I've seen posts of how to use the boot > helper process to get it back on track. I've tried it, > downloaded/uploaded the new installer files, language files, etc. And > after going through this process, "everything seems to be in order" > (Ala Austin Powers). But when it gets to the stage where I'm prompted > to start setup, I can enter the hostname, domain and ntp. And then it > reboots. And still it seems OK. But then it will ask me to configure > an admin username, and that's when the sucker starts rebooting again. > > Anybody seen this before???? Please! I am desperate. This has got to > work. (Unless, of course, one of you have seen this behaviour, and > knows the module is toast.) In which case, I'm forced to just use > proctor labs. Which is my intention, in about two months or so. Was > just hoping to use to study full labs, not play around with CUE. > > Any help/advise much appreciated! > ------------------------------------------------------------------------ > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
