Not sure, I ran into the same problem and futzed with the settings and it worked...
On Sun, Aug 2, 2009 at 2:10 PM, J Hogan<j.jho...@gmail.com> wrote: > Thanks J > > I have checked the port channel settings and all I see is a DTMF > interdigit timeout > but on the phone system there are DTMF selections for "enable for supervised > transfers" and "enable for farward message notification" > So I should rempove the command on the router for MGCP dtmf relay codec > all out-ofband? what should be there? > > On Sun, Aug 2, 2009 at 9:22 AM, Jonathan Charles <jonv...@gmail.com> wrote: >> >> For Analog, the DTMF is in band, so you need to relay it... >> >> Check the DTMF settings on the port group in CUC... >> >> J >> >> On Sat, Aug 1, 2009 at 8:46 PM, J Hogan<j.jho...@gmail.com> wrote: >> > Hello everyone >> > >> > Have have unityconnection 7.0.1 and a 2801 with 3 POTS lines. and >> > when a >> > incomming call comes it it hits the AA. and it says the defualt dial an >> > extension at any time, but when ever I dial an extension I get "did not >> > recognize that" >> > >> > I am running the 2801 as a MGCP gateway. >> > I have the MGCP gateway configeed with dtmf as Out-of-band, But I am >> > thinking that since I dont have a "D" channel that this might be why >> > this is >> > happening. >> > >> > thoughts >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> > please >> > visit www.ipexpert.com >> > >> > > > > > -- > J. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI > Yahoo ID: jhogan552000 > AIM ID: jhogan55 > MSN ID: jhogan55 > ICQ ID: 257599283 > > Live Life And Do Not Kill Time. > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
