Erwan, Few things you may do pls...
1. Check what DNIS number you are getting "debug isdn q931"
2. you may test the voice translation rule :
"test voice-translation rule 60 3123011111" and see it gets translated to 1111
or not.
HTH...
--- On Sun, 10/4/09, Erwan Erwan <e_er...@yahoo.com> wrote:
From: Erwan Erwan <e_er...@yahoo.com>
Subject: [OSL | CCIE_Voice] debug voice translation,
To: ccie_voice@onlinestudylist.com
Date: Sunday, October 4, 2009, 5:20 AM
hi,
call from PSTN to Br1 success, and it supposed to trigger the "Translation
Rule" in Br1, however can't see it.
BR1 config
----------------
voice translation-rule 60
rule 1 /^312301\(1...\)/ /\1/
!
!
voice translation-profile In-DNIS
translate called 60
!
voice-port 0/0/0:23
translation-profile incoming In-DNIS
!
instead see this , below
wondering , what is wrong ? tks
==========
BR-1#debug voice translation
VoIP Translation Rule debugging is enabled
BR-1#
*Oct 3 23:39:00.987:
//-1/BCA5EB788003/RXRULE/regxrule_stack_pop_callinfo_internal: numinfo=0x0
*Oct 3 23:39:01.015:
//-1/BCA5EB788003/RXRULE/regxrule_stack_pop_callinfo_internal: numinfo=0x0
BR-1#
*Oct 3 23:39:21.991:
//-1/CB4AB18E8004/RXRULE/regxrule_stack_pop_callinfo_internal: numinfo=0x0
*Oct 3 23:39:21.991:
//-1/CB4AB18E8004/RXRULE/regxrule_stack_pop_callinfo_internal: numinfo=0x0
-----Inline Attachment Follows-----
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
