We've taken this offline to avoid spamming the list. Will report back when (beginning to think IF) we fix it. -- Vik Malhi CCIE #13890 Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [email protected] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. > From: Michael Ciarfello <[email protected]> > Date: Mon, 12 Oct 2009 20:27:50 -0400 > To: "Girard, Jeffrey COL MIL USA" <[email protected]>, Vik Malhi > <[email protected]>, OSL Group <[email protected]> > Subject: RE: [OSL | CCIE_Voice] Vol 1 Lab 4 - CME SIP - GK - trunk - CUCMfails > > There's a gremlin in there somewhere!! Put the food and water away. > If you rebuild and it doesn't work again, post the configs and detailed CCM > config and one of us will try it out. My lab is busy with lab 5 for the next > few days. It's tough to assist in these scenarios because the whole picture > isn't there in front of you. > > ________________________________________ > From: [email protected] > [[email protected]] On Behalf Of Girard, Jeffrey COL MIL > USA [[email protected]] > Sent: Monday, October 12, 2009 8:18 PM > To: Vik Malhi; OSL Group > Subject: Re: [OSL | CCIE_Voice] Vol 1 Lab 4 - CME SIP - GK - trunk - > CUCMfails > > Vik - > Changed the DTMF type with no change > > I do not currently have a xcoder built. I tried that suggestion > (from Mike C) earlier (Sat?) but it did not change anything. As it was > not in the PG, I tore it down and reverted my configuration to the PG > solution. > > Do you want me to recreate it? > > Jeff > > ----------------------------------------------------------- > Jeffrey T. Girard ("Jeff") > COL, 53 > Future Forces Integration Directorate (FFID), Deputy - Networks > office: (915)568-1240 DSN 978 > Mobile: (915)727-4222 > reply to: [email protected] > > > -----Original Message----- > From: Vik Malhi [mailto:[email protected]] > Sent: Monday, October 12, 2009 6:07 PM > To: Girard, Jeffrey COL MIL USA; OSL Group > Subject: Re: [OSL | CCIE_Voice] Vol 1 Lab 4 - CME SIP - GK - trunk - > CUCMfails > > I'm going through them so I'm thinking out loud- pardon the suggestion > without having read through all your debugs. > > But...the first thing I want you to try is to modify the dtmf type in > the voice register pools to be rtp-nte. Cre prof/reset and try the call > again. > > Failure in DTMF negotiation results in the call setup failing. > > Secondly- and I'm guessing you have tried this already- check the MTP > checkbox on the trunk page within UCM. I'm kind of guessing you've > already done this but just in case you haven't... > > Thirdly- you've got me worried- if the army has such a slow mail server > we're all in trouble. > > Look forward to your response- in the meantime I'll go through the rest > of the stuff you sent. > > -- > Vik Malhi - CCIE #13890 > Senior Technical Instructor - IPexpert, Inc. > > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > Mailto: [email protected] > > > Join our free online support and peer group communities: > http://www.IPexpert.com/communities > IPexpert - The Global Leader in Self-Study, Classroom-Based, > Video-On-Demand and Audio Certification Training Tools for the Cisco > CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice > Lab and CCIE Storage Lab Certifications. > > > > > > > >> From: "Girard, Jeffrey COL MIL USA" <[email protected]> >> Date: Mon, 12 Oct 2009 17:54:52 -0600 >> To: Vik Malhi <[email protected]>, OSL Group >> <[email protected]> >> Cc: "Girard, Jeffrey COL MIL USA" <[email protected]> >> Subject: FW: Re:[OSL | CCIE_Voice] Vol 1 Lab 4 - CME SIP - GK - trunk >> - CUCMfails >> >> >> Vik - >> >> Sorry for the delayed response. My work (Army) email has >> had serious trouble all weekend. >> >> Have tried virtually everything that you suggested but redid them all >> anyway. >> >> >> >> I CANNOT make a G711 end to end call from any phone SIP or > >> SCCP on CME - however calls coming inbound from CUCM to CME are G711. >> >> >> >> If I use the voice-class codec command in the voip dial >> peer, the a SCCP all will negotiate down to G729 and the call > completes. >> As the voice register pool is fixed at G711, a SIP call fails. >> However, if I go in and change the voice register pool to G729r8, the >> call still fails (and yes, I went into voice register global and >> re-ran create profile and reset) >> >> >> >> So, I have included the debugs and sh runs that you asked >> for. Though the sh run for the dial peer will show the voip dial peer > >> using G711, I had to change it back to voice-class codec 1 in order to > >> get the SCCP call to complete to capture the voice call active brief >> that you wanted. >> >> >> >> I have now spent 4 days on this same issue. >> >> >> >> Hope that you can find my error so that I can learn from > it. >> >> >> >> Jeff >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
