it seems you have not bound h323 to the interface. On Thu, Oct 22, 2009 at 3:58 PM, Omotayo <adefilabi...@gmail.com> wrote:
> Hello, > i have configured hq router as h323, testing direct in cals to the hq > phone, i get a busy tone with the following output on debug > > Does anyone have an idea on how to fix this > > thanks > > Oct 22 23:48:46.028: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = > 0x008A > Bearer Capability i = 0x8090A2 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Progress Ind i = 0x8583 - Origination address is non-ISDN > Calling Party Number i = 0x4180, '2123942123' > Plan:ISDN, Type:Subscriber(local) > Called Party Number i = 0xA1, '2123945002' > Plan:ISDN, Type:National > Oct 22 23:48:46.052: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref > = 0x808A > Channel ID i = 0xA98381 > Exclusive, Channel 1 > HQ-RTR(config)# > Oct 22 23:48:46.080: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref > = 0x808A > Cause i = 0x80A6 - Network out of order > Oct 22 23:48:46.092: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = > 0x008A > Cause i = 0x82E4 - Invalid information element contents > Oct 22 23:48:46.096: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 > callref = 0x808A > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
