The key here is to look at the quetion and decide what they are looking for. I think you know, but you are not 100% sure. So get to the 100%. Kumar just hinted at the WAY it works. Take a leap, what else would IPExpert be looking for? How many correct possibilities are there in answering this question? Once you know that you can make it work as it, or correct it so it does work.
Hopefully that was clear. There are lots of these little errors in the solutions and questions. Find them, correct them and you will be better prepared. Hope that helped. ________________________________ From: [email protected] [[email protected]] On Behalf Of Nara Shikamaru [[email protected]] Sent: Tuesday, October 27, 2009 7:54 PM To: OSL Group Subject: [OSL | CCIE_Voice] Instructor Led Training Lab 1 Question 4.4 - Gatekeeper configuration problems I'm pretty sure there are mistakes in the solution for this lab. BTW, this module is worked on in the IPexpert bootcamps. In the question, 4 digit dialing needs to be handled between HQ and BR2 in g729. HQ; zone local US ipexpert.com<http://ipexpert.com> zone local SPAIN ipexpert.com<http://ipexpert.com> no shutdown BR2; int loopback 0 h323-gateway voip interfaces h323-gateway voip id PL ipaddr 10.10.110.1 1719 h323-gateway voip h323-id BR2-RTR h323-gateway voip tech-prefix 3 So, my first problem is figuring out why a voip id of PL is set on BR2. I'm PRETTY sure that it should be Spain. Is there any reason why this is set differently? In ths problem, we are not allowed to use a default prefix on the gateway. I believe that if the voip ID on BR2 is changed to SPAIN, it SHOULD work after the prefixes are configured. However, I'm still getting busing signals. Can someone see the problem? -- -Shikamaru
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
