Very true Vik I am actually addicted to it J
Robert: to avoid confusion I always create a separate region/device pool
named "media". Setup g711 region b/w media and all other sites, assign
"media" device pool to 2 MOH servers. Off course if the requirement is
to play g729 across the WAN then you would adjust the region codec
accordingly
I hate MOH this is one thing that I can't get it working in first go J
From: Robert McGhee [mailto:bobwmcg...@verizon.net]
Sent: Wednesday, 11 November 2009 4:18 PM
To: 'Vik Malhi'; Aamir Panjwani; 'Kumar, Narinder'; 'OSL Group'
Subject: RE: [OSL | CCIE_Voice] MOH spoofing at remote branch
Thanks All! It was a region issue; damn it J I haven't assigned a
codec on either of the two regions (starting a new lab), I configured
all with G711 and MOH is working so the default region codec must be
G729 or G722?
Thanks again....
________________________________
From: Vik Malhi [mailto:vma...@ipexpert.com]
Sent: Wednesday, November 11, 2009 12:13 AM
To: Aamir Panjwani; Kumar, Narinder; Robert McGhee; OSL Group
Subject: Re: [OSL | CCIE_Voice] MOH spoofing at remote branch
Aamir- good to see you sticking around! It's like the KGB used to say-
we will never let you leave (this list)! I'm sure Michael, Jonathan,
Daniel, Otto et al are still addicted too.
My two cents: no mgcp / mgcp.
Also one more: the router is not multicasting and you do not need
pim/multicast-routing enabled on the router since the router is the MOH
server and we are flooding the multicast packets onto the subnets
defined in the "multicast moh route" statement.
--
Vik Malhi - CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based,
Video-On-Demand and Audio Certification Training Tools for the Cisco
CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice
Lab and CCIE Storage Lab Certifications.
________________________________
From: Aamir Panjwani <aamir.panjw...@ivision.com.au>
Date: Wed, 11 Nov 2009 15:50:21 +1100
To: "Kumar, Narinder" <narinder.ku...@uxcg.com.au>, Robert McGhee
<bobwmcg...@verizon.net>, OSL Group <ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] MOH spoofing at remote branch
In addition to what Narinder suggested, by default MOH file name is
"music-on-hold.au" NOT "music_on_hold.au" unless you manually renamed
it. If you are playing from flash there is no need to enable
multicast/pim dense mode.
Turn on "debug ccm-manager music-on-hold events" and "debug ip igmp"
then make a test call
If you hear "tone on hold" as opposed to dead silence, that usually
means UCM config problem. Double check you mrg/mrgl/moh server/regions
etc.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kumar,
Narinder
Sent: Wednesday, 11 November 2009 3:43 PM
To: Robert McGhee; 'OSL Group'
Subject: Re: [OSL | CCIE_Voice] MOH spoofing at remote branch
Robert,
You need to change the command " multicast moh 239.1.1.1 port 16384"
To multicast moh 239.1.1.1 port 16384 router XXXX ( Voice Vlan) XXXX (
loopback)
Voice vlan for PSTN users and loopback for MOH between ip phones.
Also if it is h323 gw you need ccm-manager music-on-hold.
You need to "no" the existing commands and then add again, that's the
way of resetting MOH from flash.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Robert
McGhee
Sent: Wednesday, 11 November 2009 3:36 PM
To: 'OSL Group'
Subject: [OSL | CCIE_Voice] MOH spoofing at remote branch
Hi,
Anyone run into issues getting MOH to play from flash for
remote sites, spoofing the multicast address? I have MOH setup for
multicast on CUCM and MRGL is assigned to remote site phones. Here's
remote configuration:
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
ip source-address 10.0.200.1 port 2000
max-ephones 2
max-dn 4
moh music_on_hold.au
multicast moh 239.1.1.1 port 16384
ip multicast-routing
int f0/0
ip pim dense-mode
Nothing shows up with "show ip mroute" I don't see anything for
239.1.1.1:
For giggles I added ccm-manager music-on-hold. Still nothing just the
"beeps". The MOH file does play when the phones are in SRST mode. I
reset the streaming service and nothing, any ideas?
Thanks!!!
________________________________
CONFIDENTIALITY - The information contained in this electronic mail
message is confidential and is intended solely for the addressee(s). If
you are not an authorised recipient of this message please contact UXC
Getronics Australia immediately by reply email and destroy/delete this
message from your computer. Any unauthorised form of reproduction of
this message, or part thereof, is strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and
opinions expressed in this email are those of the sender and not UXC
Getronics Australia. While we endeavour to protect our network from
computer viruses, UXC Getronics Australia does not warrant that this
email or any attachments are free of viruses or any other defects or
errors. It is the duty of the recipient to virus scan and otherwise test
any information contained in this email before loading onto any computer
system.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
________________________________
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
_____________________________________________________________________________________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
