The adhoc conference in SRST is only 3 party conference. Max-conference 2 - Good for 2 ......3 party conference
No need of any dspfarm profile 2 conf etc. BTW did you jump into the command section of call-man-fallback and actually see any commands about registering the hardware conf. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Alex Hannah Sent: Wednesday, 11 November 2009 8:06 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SRST - Max Conference question Hello everyone, If you wanted to limit the number of conferences in SRST mode to 2, AND limit those conferences to a maximum of 3 participants, would the following be the proper approach? ! call-manager-fallback max-conference 2 ( where X would represent the total number of conferences allowed ) max-dn 25 dual-line ( this should allow each line to have 3 people on call ) ! ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 2 associate application SCCP ! Would you need to register the hardware conference bridge to SRST some how? Thanks, Alex ________________________________ CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact UXC Getronics Australia immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not UXC Getronics Australia. While we endeavour to protect our network from computer viruses, UXC Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
