You do it via translation rule's.

From: [email protected] 
[mailto:[email protected]] On Behalf Of Omotayo
Sent: Saturday, 14 November 2009 8:31 PM
To: OSL Group
Subject: [OSL | CCIE_Voice] Called Number Type on h323 gateway


Hello,

How do i configure the h233 gatway to ensure that my called number type show 
"Subscriber" for a dialed pattern

dial-peer voice 200 pots
destination-pattern 9........
forward-digit 8
port 0/0/0:15

Also when i make international calls to show "international" as the called 
number type with a dialled pattern of like

dial-peer voice 100 pots
destination-pattern 1T
forward-digit all
port 0/0/0:15

________________________________
CONFIDENTIALITY - The information contained in this electronic mail message is 
confidential and is intended solely for the addressee(s). If you are not an 
authorised recipient of this message please contact UXC Getronics Australia 
immediately by reply email and destroy/delete this message from your computer. 
Any unauthorised form of reproduction of this message, or part thereof, is 
strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and opinions 
expressed in this email are those of the sender and not UXC Getronics 
Australia. While we endeavour to protect our network from computer viruses, UXC 
Getronics Australia does not warrant that this email or any attachments are 
free of viruses or any other defects or errors. It is the duty of the recipient 
to virus scan and otherwise test any information contained in this email before 
loading onto any computer system.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to