Hello, i willget the output ande send it to you
thanks On Tue, Nov 24, 2009 at 5:24 AM, Otto Sanchez <o...@ipexpert.com> wrote: > 1.- Are intl calls the only ones that fail?, which ones succeed? > 2.- What is your Mobile Voice Access Directory Number (in ucm)? > 3.- How are you dialling that intl number?, > 4.- What is your intl route pattern? > 5.- Send the debug voip dialpeer of the outgoing gw if h323 > 6.- Send the debug isdn q931 of the outgoing gw > 7.- Send the router config, mva gw and outgoing gw > > Please answer ALL the questions, > -- > Regards, > > Otto Sanchez > CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. > Sr. Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> > On Mon, Nov 23, 2009 at 11:34 PM, Omotayo <adefilabi...@gmail.com>wrote: > >> Hello, >> i was able t dial the mobile voice access. i was not able to dial an >> innternational number after logging it. the call gets to the router but was >> not ringing on the called phone >> >> On Tue, Nov 24, 2009 at 4:57 AM, Otto Sanchez <o...@ipexpert.com>wrote: >> >>> Check that your router outgoing voip dialpeer's destination pattern >>> matches the mva number and length you defined in the Media Resources-> >>> Mobile Voice Access-> Mobile Voice Access Directory Number, otherwise your >>> calls will be dropped/disconnected, >>> >>> Also, what number are you trying to dial?, is it internal or external? >>> >>> Thanks, >>> >>> >>> On Mon, Nov 23, 2009 at 9:14 PM, Omotayo <adefilabi...@gmail.com>wrote: >>> >>>> Hello, >>>> >>>> i have configured Mobile access on the h323 gateway. i am able to >>>> callin. when tried to call after logging in. i get the following message >>>> on >>>> debug isdn q931 but the called number never rings >>>> >>>> the CSS ( not the reruting CSS) of the remote destination has a >>>> partition that points to the route pattern that dials out >>>> >>>> >>>> BR2-RTR(config)# >>>> Nov 24 01:34:32.452: %ISDN-6-CONNECT: Interface Serial0/0/0:1 is now >>>> connected to 3432143003 N/A >>>> Nov 24 01:34:32.500: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now >>>> connected to 32141891 N/A >>>> BR2-RTR(config)# >>>> Nov 24 01:34:55.372: %ISDN-6-DISCONNECT: Interface Serial0/0/0:2 >>>> disconnected from 32141891 , call lasted 28 seconds >>>> BR2-RTR(config)# >>>> Nov 24 01:34:55.376: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 >>>> callref = 0x80AD >>>> Cause i = 0x8090 - Normal call clearing >>>> Nov 24 01:34:55.384: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8 callref >>>> = 0x00AD >>>> Nov 24 01:34:55.388: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 >>>> callref = 0x80AD >>>> Nov 24 01:34:55.396: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 >>>> callref = 0x8093 >>>> Cause i = 0x8290 - Normal call clearing >>>> Nov 24 01:34:55.396: %ISDN-6-DISCONNECT: Interface Serial0/0/0:1 >>>> disconnected from 3432143003 , call lasted 28 seconds >>>> Nov 24 01:34:55.400: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 callref >>>> = 0x0093 >>>> Nov 24 01:34:55.408: %ISDN-6-DISCONNECT: Interface Serial0/0/0:0 >>>> disconnected from 32141891 , call lasted 28 seconds >>>> Nov 24 01:34:55.408: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 >>>> callref = 0x8093 >>>> Nov 24 01:34:55.408: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 >>>> callref = 0x80AB >>>> Cause i = 0x8090 - Normal call clearing >>>> Nov 24 01:34:55.420: ISDN Se >>>> BR2-RTR(config0/0/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x00AB >>>> Nov 24 01:34:55.424: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 >>>> callref = 0x80AB)# >>>> BR2-RTR(config)# >>>> >>>> Anyone with an idea of what am missing >>>> >>>> hanks >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com >>>> >>>> >>> >>> >>> -- >>> Regards, >>> >>> Otto Sanchez >>> CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE. >>> Sr. Support Engineer - IPexpert, Inc. >>> URL: http://www.IPexpert.com <http://www.ipexpert.com/> >>> >> >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
