Classification: UNCLASSIFIED
Caveats: NONE
Well, I think that I have determined that my database is corrupted.
I have taken the Sub out of the picture and everything is registered to
Pub.
I used the other two 7961 phones that I have in my lab (BR1 Ph2 and BR 2
Ph3) and put their MAC addresses into the Phone Configuration page for
HQ Ph2. In both instances, the phones upgraded from SCCP to SIP but
never registered.
They both showed the same error
Registration Rejected: DBc (and that was all that was displayed on the
screen).
So, unless someone has any great ideas on how to uncorrupt my database,
Im going to move on to the next lab.
BTW, the manager portion of the IPMA worked fine.
-----------------------------------------------------------
Jeffrey T. Girard ("Jeff")
COL, 53
Future Forces Integration Directorate (FFID), Deputy - Networks
office: (915)568-1240 DSN 978
Mobile: (915)727-4222
reply to: [email protected]
-----Original Message-----
From: Otto Sanchez [mailto:[email protected]]
Sent: Thursday, December 17, 2009 5:47 PM
To: Girard, Jeffrey COL MIL USA
Cc: [email protected]; anil batra
Subject: Re: [OSL | CCIE_Voice] HQ PH 2 7961 wont pick up the IMPA
Assistant Phone Button Template (UNCLASSIFIED)
Jeff,
In addition to the Anil's suggestions, have you tried to register the
phone to the pub?, If the issue is fixed, you may want to force db
replication from publisher server to the subs,
On Thu, Dec 17, 2009 at 6:50 PM, anil batra <[email protected]> wrote:
I am sure you must have but just wanted to give my two cents to try -
have u restarted the CCM/TFTP service too.
--- On Fri, 12/18/09, Girard, Jeffrey COL MIL USA
<[email protected]> wrote:
From: Girard, Jeffrey COL MIL USA <[email protected]>
Subject: [OSL | CCIE_Voice] HQ PH 2 7961 wont pick up the IMPA
Assistant Phone Button Template (UNCLASSIFIED)
To: [email protected], "Girard, Jeffrey COL MIL
USA" <[email protected]>
Date: Friday, December 18, 2009, 12:19 AM
Classification: UNCLASSIFIED
Caveats: NONE
My own equipment, not PL.
HQ PH 2 is a 7961 SIP. Have been using the same phone since I
stated
VOL 1 Lab1 with no prior issues
Working Lab 9.4 (IPMA). Copied the 7961 SIP standard phone
button
template and added the intercom line. Assigned the template to
the
phone. Saved and reset (at least a dozen times)
Phone resets but keeps the old Phone Button Template (primary
line 5002,
second shared line 1010, and the Call Park BLF - from previous
labs).
I have power cycled the phone with no change.
I reset the phone to factory defaults and then let it reload SIP
and
reregister with no change. It is still displaying the "old"
phone
button template
Jeff
-----------------------------------------------------------
Jeffrey T. Girard ("Jeff")
COL, 53
Future Forces Integration Directorate (FFID), Deputy - Networks
office: (915)568-1240 DSN 978
Mobile: (915)727-4222
reply to: [email protected]
<blockedhttp://us.mc379.mail.yahoo.com/mc/[email protected]
rmy.mil>
Classification: UNCLASSIFIED
Caveats: NONE
_______________________________________________
For more information regarding industry leading CCIE Lab
training, please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab
training, please visit www.ipexpert.com
--
Regards,
Otto Sanchez
CCIE #25592 (Voice)
Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com <blockedhttp://www.IPexpert.com>
Classification: UNCLASSIFIED
Caveats: NONE
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com