Hi, thanks you are correct again,
Now the call completes as g711 both ways (so moh is working in both directions)
Thanks again
From: omar.dahm...@gmx.de
To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
Subject: AW: AW: [OSL | CCIE_Voice] MOH from flash to PSTN
Date: Wed, 27 Jan 2010 10:57:53 +0100
Try to configure voice class codec
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
…and assign it to the dial peers to CUCM Cluster.
This way the G.711 codec negotiation for MOH will be possible.
Von: Angel Perez [mailto:gorr...@hotmail.com]
Gesendet: Mittwoch, 27. Januar 2010 10:05
An: omar.dahm...@gmx.de; osl osl
Betreff: RE: AW: [OSL | CCIE_Voice] MOH from flash to PSTN
Thanks Omar:
Your are correct, not sure why but when pstn phone calls br1 phone, pstn phone
is sending the call as g711 but br1 phone it's recieving the call as g729.
The matrix between the phone and the gw is g711 (when br1 phone calls pstn
phone both send ansd recieve as g711), is an h323 gw with and E1 R2.
I will investigate and update, any suggestion anyway??
From: omar.dahm...@gmx.de
To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
Subject: AW: [OSL | CCIE_Voice] MOH from flash to PSTN
Date: Tue, 26 Jan 2010 19:46:28 +0100
Maybe it is for some reason a codec mismatch. So maybe your MOH Server is using
G711 and the Gateway is using G729.
Please try to allow G729 as well on the IP Voice Media Streaming App and check
if you still hear beep when calling from the PSTN phone.
If you hear nothing, then do a sh ccm-manager music-on-hold again to check if
the multicast address is 239.1.1.3.
Which protocol are you using, MGCP or H.323?
HTH,
Omar
Von: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Angel Perez
Gesendet: Dienstag, 26. Januar 2010 18:13
An: ccie_voice@onlinestudylist.com
Betreff: [OSL | CCIE_Voice] MOH from flash to PSTN
Hello:
I've two scenarios:
1- BR1 phone calls PSTN phone: Then I press hold on BR1 phone and I hear moh
from flash on PSTN phone (expected behaviour)
BR1#sh ccm-manager music-on-hold
Current active multicast sessions : 1
Multicast RTP port Packets Call Codec Incoming
Address number in/out id Interface
===================================================================
239.1.1.1 16384 476/476 34 g711ulaw Lo0
2- PSTN phone calls BR1 phone: Then I press hold on BR1 phone and I hear 'beep
beep beep" Is this the normal situation or I shoul hear moh too in this case?
BR1#sh ccm-manager music-on-hold
Current active multicast sessions : 0
My config:
ccm-manager music-on-hold
call-manager-fallback
ip source-address 10.2.30.254 port 2000
max-ephones 2
max-dn 2 dual-line
moh music-on-hold.au
multicast moh 239.1.1.1 port 16384 route 10.2.30.254 172.2.1.254 ! voice vlan
and loo0
Thanks in advance
¡Nuevo MSN Deportes! Sigue los partidos en directo y encuentra la última
información de tus equipos favoritos.
¡Nuevo MSN Deportes! Sigue los partidos en directo y encuentra la última
información de tus equipos favoritos.
_________________________________________________________________
¡Seducción! 249 historias cada semana en el sitio nº1 para conseguir una cita.
¡Regístrate!
http://contactos.es.msn.com/?mtcmk=015352
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
