Hi Bob,
call-block xlation-profile only support incoming call matching, therefore it
can only be applied to inbound dial-peer. vp level does not support call-block.
I am trying to prevent all calls going to a particular external destination.
Any other idea?
Cheers,
Harry
From: [email protected]
Subject: RE: [OSL | CCIE_Voice] Use voice translation-rule to reject outgoing
calls
Date: Fri, 29 Jan 2010 10:54:33 -0500
To: [email protected]; [email protected]
I believe you need to configure the call-block xlation-profile command instead
of the xlation-profile command, at the dp or vp level. Hope that helps....
From: Harry Shen <[email protected]>
Sent: Friday, January 29, 2010 8:47 AM
To: [email protected]
Subject: [OSL | CCIE_Voice] Use voice translation-rule to reject outgoing calls
Hi All,
I run into a problem of blocking outgoing calls by using translation-rule.
Now I want to block all calls from BR2(CME) to 12123942123 (PSTN number), here
is my translation rule config:
voice translation-rule 1
rule 1 reject /12123942123/
!
voice translation-profile REJECT
translate called 1
!
dial-peer voice 1 pots
destination-pattern 12123942123
no digit-strip
port 0/1/0:15
translation-profile outgoing REJECT
!
test voice translation-rule 1 12123942123
12123942123 blocked on rule 1
However, calls can still come through. Can anyone advise what the problem is?
Big thanks for any advice
Cheers,
Harry
Sell your old one fast! Time for a new car?
_________________________________________________________________
Time for a new car? Sell your old one fast!
http://clk.atdmt.com/NMN/go/157637060/direct/01/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com