Make sure you reset the route list if you do any type of adding or stripping.
On Wed, Feb 10, 2010 at 11:38 AM, Jeff Price (jeffpric) <jeffp...@cisco.com>wrote: > Jeff, > > > > If I did that then there would be no route pattern match (Only one route > pattern = \+!). I am using a globalized dial plan. The + should be > stripped at either the RG or GW level. I got this working, I’m not sure > what was the problem, again. It just started working after some time. I > hope I don’t encounter problems like this during the real lab J > > > > Jeff > > > > *From:* Jeff Knuckle [mailto:jknuc...@nationwidelab.com] > *Sent:* Wednesday, February 10, 2010 3:19 AM > *To:* Jeff Price (jeffpric); ccie_voice@onlinestudylist.com > *Subject:* RE: Called Party Transformation Problem > > > > Try excluding the ‘Prefix = +’ from your Called Party Transformation. > > > > - *Called Party Transformations* > - *Called Party Mask* = > - *Discard Digits Instruction* = PreDot > - *Prefix* = + > > > > > > * **Jeff * > > > > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Jeff Price > (jeffpric) > *Sent:* Tuesday, February 09, 2010 8:34 PM > *To:* ccie_voice@onlinestudylist.com > *Subject:* [OSL | CCIE_Voice] Called Party Transformation Problem > > > > Hey everyone, > > > > I am having trouble getting the + taken off of my called numbers prior to > be sent to the gateway. I am assuming I’m having the same problem with my > calling numbers, but just like the last time I had the problem, calls aren’t > making it to the gateway for me to see the ISDN output. Here is the DNA > output to verify that the digit manipulation occurs as I want it to, and it > does. > > > > *Cisco Unified Communications Manager Dialed Number Analyzer Results * > > · *Results Summary* > > - *Calling Party Information* > - *Calling Party* = +7752011001 > - *Partition* = PT_HQ_DEVICES > - *Device CSS* = CSS_HQ_DEVICES > - *Line CSS* = > - *AAR Group Name* = > - *AAR CSS* = > - *Dialed Digits* = 914084252222 > - *Match Result* = RouteThisPattern > - *Matched Pattern Information* > - *Pattern* = \+! > - *Partition* = PT_GLOBAL > - *Time Schedule* = > - *Called Party Number* = +14084252222 > - *Time Zone* = Pacific Standard/Daylight Time > - *End Device* = RL_LOCAL > - *Call Classification* = OffNet > - *InterDigit Timeout* = NO > - *Device Override* = Disabled > - *Outside Dial Tone* = NO > > · *Call Flow* > > - *TranslationPattern* :*Pattern*= 9.1[2-9]XX[2-9]XXXXXX > - *Positional Match List* = +14084252222 > - *Calling Party Number* = +7752011001 > - *PreTransform Calling Party Number* = 1001 > - *PreTransform Called Party Number* = 914084252222 > - *Calling Party Transformations* > - *External Phone Number Mask* = YES > - *Calling Party Mask* = > - *Prefix* = > - *CallingLineId Presentation* = Default > - *CallingName Presentation* = Default > - *Calling Party Number* = +7752011001 > - *ConnectedParty Transformations* > - *ConnectedLineId Presentation* = Default > - *ConnectedName Presentation* = Default > - *Called Party Transformations* > - *Called Party Mask* = > - *Discard Digits Instruction* = PreDot > - *Prefix* = + > - *Called Number* = +14084252222 > - *Route Pattern* :*Pattern*= \+! > - *Positional Match List* = +14084252222 > - *DialPlan* = > - *Route Filter* > - *Filter Name* = > - *Filter Clause* = > - *Require Forced Authorization Code* = No > - *Authorization Level* = 0 > - *Require Client Matter Code* = No > - *Call Classification* = > - *PreTransform Calling Party Number* = +7752011001 > - *PreTransform Called Party Number* = +14084252222 > - *Calling Party Transformations* > - *External Phone Number Mask* = NO > - *Calling Party Mask* = > - *Prefix* = > - *CallingLineId Presentation* = Default > - *CallingName Presentation* = Default > - *Calling Party Number* = +7752011001 > - *ConnectedParty Transformations* > - *ConnectedLineId Presentation* = Default > - *ConnectedName Presentation* = Default > - *Called Party Transformations* > - *Called Party Mask* = > - *Discard Digits Instruction* = None > - *Prefix* = > - *Called Number* = +14084252222 > - *Route List* :*Route List Name*= RL_LOCAL > - *RouteGroup* :*RouteGroup Name*= Standard Local Route Group > - *PreTransform Calling Party Number* = +7752011001 > - *PreTransform Called Party Number* = +14084252222 > - *Calling Party Transformations* > - *External Phone Number Mask* = Default > - *Calling Party Mask* = > - *Prefix* = > - *Calling Party Number* = +7752011001 > - *Called Party Transformations* > - *Called Party Mask* = > - *Discard Digits Instructions* = > - *Prefix* = > - *Called Number* = +14084252222 > > I have applied at the Gateway level: > > Calling Party Transformation CSS: CSS_HQ_CALLING_OUT which includes > PT_HQ_CALLING_OUT > > Called Party Transformation CSS: CSS_HQ_CALLED_OUT which includes > PT_HQ_CALLED_OUT > > Just a note that I have unchecked the respective boxes for use of Device > Pool CSSs > > > > I have created the following Calling and Called Transformation Patterns: > > \+.! > > DDI: Predot > > PT_HQ_CALLING_OUT > > > > \+.! > > DDI: Predot > > PT_HQ_CALLED_OUT > > > > However, when I dial ‘914084252222’ as shown earlier in DNA, the + is still > there on my phone screen as I am receiving the fast busy signal. This is > the same problem I was having a couple days ago when I restarted both > PUB/SUB and this began working. So naturally I did this again. However, > now it’s still not removing the + from the front of the called number > resulting in fast busy. > > > > Any ideas as to why these Transformation CSSs won’t work for me? Thanks > guys. > > > > > > [image: > http://www.cisco.com/cisco/web/UK/images/emails/signaturetool/the_human_network_logo.jpg] > > *Jeff Price > Network Consulting Engineer - Unified Communications Practice* > * > * > jeffp...@cisco.com > Phone: *408-525-8293* > Mobile: *408-204-4510* > > *Cisco Systems, Inc.* > 170 West Tasman Drive, > San Jose, CA 95134-1706 > USA > Cisco home page <http://www.cisco.com/> > > > > [image: > http://www.cisco.com/cisco/web/UK/images/emails/signaturetool/welcome_to_human_network_lo.jpg] > > [image: > http://www.cisco.com/global/EMEA/brand/signature/capital/green.gif]Think > before you print. > > > > This email may contain confidential and privileged material for the sole > use of the intended recipient. > > Any review, use, distribution or disclosure by others is strictly > prohibited. If you are not the intended > > recipient (or authorized to receive for the recipient), please contact the > sender by reply email and > > delete all copies of this message. > > For corporate legal information go to: > http://www.cisco.com/web/about/doing_business/legal/cri/index.html > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com