Can you pls post the "debug isdn q931" output here to further troubleshoot it.
On Fri, Feb 12, 2010 at 8:50 AM, Steve Denney (stdenney) <stden...@cisco.com > wrote: > Racking my brains a bit over this one... > > > > Trying to place a call from BR1 Ph2 (SCCP IP Blue) to 911 (PSTN phone). > > Getting a fast busy and this display on the phone: “Cannot reach the > number”. > > > > Calls from HQ Ph2 (SIP CICP) to 911 work fine – so I know the CUCM route > pattern for 911 is working. > > Also, getting the secondary dial tone when the 9 is dialed from BR1 Ph2 – > so the phone is definitely hitting the route pattern. > > The call just never seems to reach the BR1 MGCP gateway. > > > > 911 Route Pattern (<None> partition) points to rl-local-gw, which points to > Standard Local Route Group. > > Device Pool BR1 is configured to use Local Route Group of rg-br1. > > Route group rg-br1 has the proper GW selected (S0/SU0/ > ds...@br-rtr.proctorlabs.com). > > BR1 GW is cleanly registered to CUCM, with multiple_frame_established. > > Have bounced no mgcp / mgcp on BR1 GW, and have reset the phone and route > list, multiple times. > > There are no other route patterns configured which could be conflicting. > > > > Any thoughts? > > > > thx, sd > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
