Wierd H323 gateway problem.... PSTN inbound call to BR2 phones does not ring phones.. calls come in and i verify using debug isdn q931 but phone does not ring, if i use csim start from gateway to call phone, it rings, so that eliminates partition and inbound CSS issue. phone can successfully make outbound calls.
BR1#sh run | s dial-peer dial-peer voice 1000 voip destination-pattern 1...$ voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.11 dtmf-relay h245-alphanumeric ip qos dscp cs3 signaling no vad dial-peer voice 1005 voip preference 1 destination-pattern 1...$ voice-class codec 1 voice-class h323 1 session target ipv4:10.10.210.10 dtmf-relay h245-alphanumeric ip qos dscp cs3 signaling no vad dial-peer voice 10 pots destination-pattern 9%911 incoming called-number . no digit-strip direct-inward-dial port 0/1/1:23 dial-peer voice 15 pots translation-profile outgoing 7digitani destination-pattern 9[2-9]...... port 0/1/1:23 forward-digits 7 dial-peer voice 20 pots translation-profile outgoing TEHO-BR2 destination-pattern 0114420T port 0/1/1:23 forward-digits all dial-peer voice 25 pots incoming called-number . direct-inward-dial BR1# BR1# BR1# BR1#csim start 1001 csim: called number = 1001, loop count = 1 ping count = 0 Feb 13 17:44:24.956: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Calling Number=, Called Number=1001, Peer Info Type=DIALPEER_INFO_SPEECH Feb 13 17:44:24.956: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=1001 Feb 13 17:44:24.956: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST Feb 13 17:44:24.956: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=1000 2: Dial-peer Tag=1005 csim err csimDisconnected recvd DISC cid(97) csim: loop = 1, failed = 1 csim: call attempted = 1, setup failed = 1, tone failed = 0 BR1# BR1# BR1# BR1# BR1# BR1#csim start 1002 csim: called number = 1002, loop count = 1 ping count = 0 Feb 13 17:44:43.460: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Calling Number=, Called Number=1002, Peer Info Type=DIALPEER_INFO_SPEECH Feb 13 17:44:43.460: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Match Rule=DP_MATCH_DEST; Called Number=1002 Feb 13 17:44:43.460: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Result=Success(0) after DP_MATCH_DEST Feb 13 17:44:43.460: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers: Result=SUCCESS(0) List of Matched Outgoing Dial-peer(s): 1: Dial-peer Tag=1000 2: Dial-peer Tag=1005 csim err csimDisconnected recvd DISC cid(98) csim: loop = 1, failed = 1 csim: call attempted = 1, setup failed = 1, tone failed = 0 BR1# BR1# BR1# BR1# BR1# BR1#ping 10.10.210.11 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.210.11, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/56/60 ms BR1#ping 10.10.210.10 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.210.10, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/57/60 ms BR1# any thots?
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com