Sorry - Bad forum etiquette by not sharing the fix, but I wasn't sure how/why.
I had created a dial-peer for the mgcpapp in addition to the one assigned automatically. I removed the duplicate and then did "no mgcp, mgcp". Probably just the no mgcp, mgcp that fixed it, but maybe having multiple mgcpapp dial-peers for the same FXO wasn't good either. Thanks --- On Thu, 2/18/10, Roger Källberg <[email protected]> wrote: From: Roger Källberg <[email protected]> Subject: SV: [OSL | CCIE_Voice] FXO Inbound w/ MGCP To: "Ken Kov" <[email protected]>, "[email protected]" <[email protected]> Date: Thursday, February 18, 2010, 5:34 AM Hi Ken, It would be nice if you could take the time to describe what was wrong and what you did to rectify it. Brgds, Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 [email protected] Från: Ken Kov [[email protected]] Skickat: den 17 februari 2010 14:27 Till: [email protected] Ämne: Re: [OSL | CCIE_Voice] FXO Inbound w/ MGCP Disregard. Solved. Thanks --- On Tue, 2/16/10, Ken Kov <[email protected]> wrote: From: Ken Kov <[email protected]> Subject: [OSL | CCIE_Voice] FXO Inbound w/ MGCP To: [email protected] Date: Tuesday, February 16, 2010, 5:25 PM Any ideas on why I can't get an IP phone to ring for inbound calls into an FXO? - Can make outbound calls. - Am using MGCP - Have the "service mgcpapp" on the voice port - CSS for the gateway allows calls to the IP phone - Have "bothways" on gateway - Have the DN on the CallManager config of that port - See it come into router with "debug voice ccapi inout" Thanks, Ken -----Inline Attachment Follows----- _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
