HI,
I have been racking my brain for a while now and give up.
I loaded the lab 3A initial config and it was missing OSPF config, VLAN and
interace configuration...And I am not sure what else. I reverted the pod twice
and added some config in but I am still not able to register my phone and http
to the router for GUI access.
The problem this is causing me is access from my PC so I can register my phone
on my laptop.
Can someone look into this as why the config is missing so much?
Thanks,
Randall
________________________________________
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com [ccie_voice-requ...@onlinestudylist.com]
Sent: Saturday, February 20, 2010 9:00 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 48, Issue 115
Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com
You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."
Today's Topics:
1. VOL2 LAB 6 (kavi ten)
2. VOL2 LAB 6 UCME with UC (kavi ten)
----------------------------------------------------------------------
Message: 1
Date: Sat, 20 Feb 2010 18:55:30 +0400
From: kavi ten <kaucc...@gmail.com>
Subject: [OSL | CCIE_Voice] VOL2 LAB 6
To: ccie_voice@onlinestudylist.com
Message-ID:
<2115142c1002200655v44a9349ak12f9e2ab1058...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi Guys,
I got stuck at the Teho dialing Question 4.5
I have the CME dial-peer configured & it works fine as the call to HQ/BR1
hits the GK
I also have the translation pattern configured to match the incoming call
same as in the PG
1#39001972XXXXXXX FOR 3303333 with called no xformation
Still the call is not going to the BR1 gw & same the case with HQ calls
The call then dial from BR2 PRI as per the preference.
I can not understand how this should work as I have all parameter
configured.
Can some one guide me through how to go about this.
Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/28296b94/attachment-0001.htm
------------------------------
Message: 2
Date: Sat, 20 Feb 2010 19:58:10 +0400
From: kavi ten <kaucc...@gmail.com>
Subject: [OSL | CCIE_Voice] VOL2 LAB 6 UCME with UC
To: ccie_voice@onlinestudylist.com
Message-ID:
<2115142c1002200758j17a99b37t604b6ccdec7b8...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi Guys,
When have the done the configuration as per the Guide, but the BR2 Phn1
phone on busy /noan , the incoming call gets disconnected.
I checked the debug voice ccapi inout , which says disconnect cause of 19 ,
means no answer from the UC.
Has any one come across this problem.
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/73fa1cc5/attachment-0001.htm
------------------------------
_______________________________________________
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 48, Issue 115
*******************************************
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
