Hi all,

Any idea regarding the below issue?

On Sun, Feb 21, 2010 at 11:02 PM, Saeed IDris <[email protected]> wrote:

>
>
> Hi,
>
> I have strange issue with CME conference call, actually the conference call
> is working fine but the problem is when conference initiator discount the
> PSTN call the remote party (other PSTN lines) still up and I have to reset
> the FXO manually, already I opened case with Cisco team but not hope yet …..
> kindly, check the below configuration:
>
> ****** CME Config ******
>
> voice call send-alert
>
> !
>
> voice service pots
>
> !
>
> voice service voip
>
>  allow-connections h323 to h323
>
>  allow-connections h323 to sip
>
>  allow-connections sip to h323
>
>  allow-connections sip to sip
>
>  supplementary-service h450.12
>
>  no supplementary-service sip moved-temporarily
>
>  no supplementary-service sip refer
>
>  fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
>
>  h323
>
>  modem passthrough nse codec g711ulaw
>
>  sip
>
>   bind control source-interface GigabitEthernet0/0
>
>   bind media source-interface GigabitEthernet0/0
>
>   header-passing
>
>   registrar server expires max 3600 min 120
>
> !
>
> voice class codec 1
>
>  codec preference 1 g711ulaw
>
>  codec preference 2 g711alaw
>
>  codec preference 3 g729r8
>
> !
>
> voice register global
>
>  mode cme
>
>  source-address 192.168.10.1 port 5060
>
>  max-dn 50
>
>  max-pool 30
>
>  load 7971 term71.default
>
>  load 7970 SIP70.8-5-2SR1S
>
>  load 7941 SIP41.8-5-2SR1S
>
>  load 7911 SIP11.8-5-2SR1S
>
>  authenticate register
>
>  authenticate realm
>
>  timezone 31
>
>  hold-alert
>
>  mwi stutter
>
>  mwi reg-e164
>
>  dialplan-pattern 1 1.. extension-length 3
>
>  dialplan-pattern 2 2.. extension-length 3
>
>  tftp-path flash:
>
>  create profile sync 1041633015501962
>
> !
>
> voice register dn  1
>
>  number XXX
>
>  allow watch
>
>  name NAME
>
>  no-reg
>
>  label 180
>
> !
>
> voice register pool  1
>
>  id mac 0000.0000.0000
>
>  number 1 dn 1
>
>  presence call-list
>
>  dtmf-relay rtp-nte
>
>  username 180 password 180
>
>  codec g711ulaw
>
>  no vad
>
> !
>
>
>
> voice-port 0/2/0
>
>  supervisory disconnect anytone
>
>  supervisory custom-cptone 1
>
>  input gain 3
>
>  cptone BR
>
>  timeouts initial 0
>
>  timeouts interdigit 5
>
>  timeouts call-disconnect 0
>
>  timeouts ringing 5
>
>  timeouts wait-release 1
>
>  connection plar opx 777
>
>  description Phone Number
>
>  bearer-cap Speech
>
>  caller-id enable
>
>  caller-id alerting line-reversal
>
>  caller-id alerting dsp-pre-allocate
>
> !
>
> voice-port 0/2/1
>
>  supervisory disconnect anytone
>
>  supervisory custom-cptone 1
>
>  input gain 3
>
>  echo-cancel coverage 32
>
>  cptone BR
>
>  timeouts initial 0
>
>  timeouts interdigit 5
>
>  timeouts call-disconnect 0
>
>  timeouts ringing 5
>
>  timeouts wait-release 1
>
>  connection plar opx 777
>
>  description Phone Number
>
>  bearer-cap Speech
>
>  caller-id enable
>
>  caller-id alerting line-reversal
>
>  caller-id alerting dsp-pre-allocate
>
> !
>
> voice-port 0/2/2
>
>  supervisory custom-cptone 1
>
>  input gain 3
>
>  echo-cancel coverage 32
>
>  cptone BR
>
>  timeouts initial 0
>
>  timeouts interdigit 5
>
>  timeouts call-disconnect 0
>
>  timeouts ringing 5
>
>  timeouts wait-release 1
>
>  connection plar opx 777
>
>  description Phone Number
>
>  bearer-cap Speech
>
>  caller-id enable
>
>  caller-id alerting line-reversal
>
>  caller-id alerting dsp-pre-allocate
>
> !
>
> voice-port 0/2/3
>
>  supervisory disconnect anytone
>
>  supervisory custom-cptone 1
>
>  input gain 3
>
>  cptone BR
>
>  timeouts initial 0
>
>  timeouts interdigit 5
>
>  timeouts call-disconnect 0
>
>  timeouts ringing 5
>
>  timeouts wait-release 1
>
>  connection plar opx 4114
>
>  description Phone Number International
>
>  bearer-cap Speech
>
>  caller-id enable
>
>  caller-id alerting line-reversal
>
>  caller-id alerting dsp-pre-allocate
>
> !
>
> gateway
>
>  timer receive-rtp 1200
>
> !
>
> sip-ua
>
> !
>
> !
>
> telephony-service
>
>  sdspfarm conference mute-on 111 mute-off 222
>
>  sdspfarm units 2
>
>  sdspfarm transcode sessions 3
>
>  sdspfarm tag 1 mtp001e13cd2d00
>
>  sdspfarm tag 2 mtp123445672012
>
>  authentication credential admin admin
>
>  authentication credential secretname passwrd
>
>  em logout 7:0 23:50
>
>  max-ephones 50
>
>  max-dn 100
>
>  ip source-address 192.168.10.1 port 2000
>
>  auto assign 1 to 30
>
>  service directed-pickup gpickup
>
>  timeouts ringing 15
>
>  system message Welcome to TEL Sys.
>
>  url services http://192.168.3.80:4400/default.aspx?crm;contacts
>
>  url authentication http://192.168.10.1/CCMCIP/authenticate.asp secretname
> psswrd
>
>  load 7936 cmterm_7936.3-3-13-0
>
>  load 7941 SCCP41.8-2-2SR2S
>
>  load 7961 SCCP41.8-2-2SR2S
>
>  load 7970 SCCP70.8-2-2SR2S
>
>  load 7971 SCCP70.8-2-2SR2S
>
>  time-zone 31
>
>  date-format dd-mm-yy
>
>  voicemail 700
>
>  max-conferences 4 gain -6
>
>  call-forward pattern .T
>
>  moh MOH-NEW.AU
>
>  multicast moh 239.10.16.4 port 2111 route 192.168.10.254
>
>  web admin system name admin password !d...@$$
>
>  dn-webedit
>
>  time-webedit
>
>  transfer-system full-consult
>
>  transfer-pattern .T
>
>  secondary-dialtone 9
>
>  login timeout 30 clear 23:00
>
>  night-service everyday 09:00 23:59
>
>  create cnf-files version-stamp 7960 Jun 30 2009 10:15:37
>
> !
>
> ephone-dn-template  5
>
> !
>
> ephone-template  2
>
>  softkeys hold  Join Newcall Resume Select
>
>  softkeys idle  Cfwdall Redial Newcall Join Gpickup Pickup Dnd
>
>  softkeys seized  Endcall Redial Cfwdall Gpickup Pickup
>
>  softkeys connected  ConfList Confrn Endcall Hold Join Park RmLstC Select
> Trnsfer
>
> !
>
> !
>
> ephone-template  3
>
>  softkeys hold  Join Newcall Resume Select
>
>  softkeys idle  Cfwdall Redial Newcall Join Gpickup Pickup Dnd
>
>  softkeys seized  Endcall Redial Cfwdall Gpickup Pickup
>
>  softkeys connected  ConfList Confrn Endcall Hold Join Park RmLstC Select
> Trnsfer
>
> !
>
>
>
> !
>
> ephone-dn  1
>
>  number 444
>
>  pickup-group 50
>
>  label 444
>
>  description Conference Room2
>
>  name Conference Room 2
>
>  call-forward busy 700
>
>  call-forward noan 700 timeout 20
>
>  corlist incoming CSS-NATIONAL
>
>  hold-alert 30 originator
>
> !ephone-dn  2  dual-line
>
>  number 401
>
>  pickup-group 50
>
>  label 401
>
>  description
>
>  name
>
>  call-forward busy 700
>
>  call-forward noan 700 timeout 30
>
>  corlist incoming CSS-NATIONAL
>
>  hold-alert 30 originator
>
> !
>
> ephone-dn  3  dual-line
>
>  number 258
>
>  pickup-group 50
>
>  label 258
>
>  description
>
>  name
>
>  call-forward busy 700
>
>  call-forward noan 700 timeout 20
>
>  corlist incoming CSS-INTERNATIONAL
>
>  hold-alert 30 originator
>
> !
>
> !
>
> ephone-dn  4  dual-line
>
>  number 234
>
>  pickup-group 50
>
>  label 234
>
>  description
>
>  name
>
>  call-forward busy 700
>
>  call-forward noan 700 timeout 20
>
>  corlist incoming CSS-INTERNATIONAL
>
>  hold-alert 30 originator
>
> !
>
> !
>
> ephone-dn  64  dual-line
>
>  number 8889
>
>  name Conference
>
>  conference ad-hoc
>
>  no huntstop
>
> !
>
> ephone-dn  65  dual-line
>
>  number 8889
>
>  name Conference
>
>  conference ad-hoc
>
>  preference 1
>
>  no huntstop
>
> !
>
> ephone-dn  66  dual-line
>
>  number 8889
>
>  name Conference
>
>  conference ad-hoc
>
>  preference 2
>
>  no huntstop
>
> !
>
> ephone-dn  67  dual-line
>
>  number 8889
>
>  name Conference
>
>  conference ad-hoc
>
>  preference 3
>
> ephone  1
>
>  device-security-mode none
>
>  mac-address 00E0.75F3.C637
>
>  ephone-template 2
>
>  paging-dn 20
>
>  type 7936
>
>  keep-conference endcall
>
>  button  1:1
>
> !
>
> ephone  2
>
>  device-security-mode none
>
>  mac-address 001B.D433.4AEF
>
>  ephone-template 2
>
>  paging-dn 20
>
>  type 7941
>
>  keep-conference endcall
>
>  button  1:17
>
> !
>
> ephone  3
>
>  device-security-mode none
>
>  description
>
>  mac-address 001B.D433.0A02
>
>  ephone-template 2
>
>  paging-dn 20
>
>  type 7941
>
>  keep-conference endcall
>
>  button  1:3
> ****** CME Config ******
> Regards,
> SAEED
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to