For some reason I can not get my MWI to work on Proctorlabs. Perhaps I am missing something.
One thing I noticed is port group under servers when I do the ping tests I cannot ping Callmanager but if I put the default gateway as 1 of the servers and do the ping test it works fine. IP Address 10.10.210.10 (pub) Response Time Timed Out IP Address 10.10.210.11 (sub) Response Time Timed Out IP Address 10.10.210.1 (default gateway - hq-rtr) Response Time 3 <<<<<<<<<<<<<< >From Unity CLI i can ping the callmanagers without issues.. admin:utils netw admin:utils network ping 10.10.210.10 PING 10.10.210.10 (10.10.210.10) 56(84) bytes of data. 64 bytes from 10.10.210.10: icmp_seq=0 ttl=64 time=1.69 ms 64 bytes from 10.10.210.10: icmp_seq=1 ttl=64 time=0.324 ms 64 bytes from 10.10.210.10: icmp_seq=2 ttl=64 time=0.303 ms 64 bytes from 10.10.210.10: icmp_seq=3 ttl=64 time=0.325 ms --- 10.10.210.10 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3223ms rtt min/avg/max/mdev = 0.303/0.662/1.698/0.598 ms, pipe 2 admin:utils network ping 10.10.210.11 PING 10.10.210.11 (10.10.210.11) 56(84) bytes of data. 64 bytes from 10.10.210.11: icmp_seq=0 ttl=64 time=0.474 ms 64 bytes from 10.10.210.11: icmp_seq=1 ttl=64 time=0.374 ms 64 bytes from 10.10.210.11: icmp_seq=2 ttl=64 time=0.290 ms 64 bytes from 10.10.210.11: icmp_seq=3 ttl=64 time=0.380 ms --- 10.10.210.11 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3007ms rtt min/avg/max/mdev = 0.290/0.379/0.474/0.067 ms, pipe 2 I have tried rebooting Unity. I feel its just something to do with the vmware set up. As anyone else had this problem. Regards, Mike Brooks CCIE# 16027(R&S)
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
