Hello Pulos, Thanks
I am actually reading it at the moment. Guess am not clear On Wed, Mar 3, 2010 at 3:51 PM, Pulos, Greg <gpu...@doc.gov> wrote: > The Cisco SRNDs for unified communications will tell you everything you > need to know about how, where, why conferencing/transcoding/mtp resources > are required. > > Please see the following link for more info on SRNDs for unified > communications. > > http://www.cisco.com/iam/unified/ipt1/Using_SRND_Documents.htm > > greg > > > -----Original Message----- > From: ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo > Sent: Wednesday, March 03, 2010 7:19 AM > To: Otto Sanchez > Cc: OSL Group > Subject: Re: [OSL | CCIE_Voice] Barge > > Hello Otto, > > I want to make few clarification. > > If i have a centralized call processing system > > Hq phones need to barge into br1 phone. where do i need to configure the > conferencing resouces ( hq router or br1 router) and which conferencing > resources is used > > > Also for transcoder, if br1 phones needs to access a server resources that > is using g711 and br1 phones is coming with g729 cuz its going across the > wan. where do i configure the transcoding resources- the hq router or br1 > router > > thanks > > > On Sun, Feb 21, 2010 at 8:10 PM, Otto Sanchez <o...@ipexpert.com> wrote: > > > If you are barging br1phn2 the br1 conference resources are used, > not the hq ones. Also make sure that br1phn2 has privacy off by the use of > the privacy button or has privacy off in the device configuration, > > Finally, make sure that when cbarging from the shared line button, > your hq phone config has the cbarge setting configured, > > > On Sat, Feb 20, 2010 at 4:24 PM, Omotayo <adefilabi...@gmail.com> > wrote: > > > Hello, > working on Volume 1 lab 8 > IOS conference has been cnfigured on hq router > when i tried with question 8.1 i used hq phones as bri phone > of the question and vice versa > on pressing the button on br1 phone 2 when in In Use Remote, > i still see the barge softkey and it gives the message No Conference Bridge > CBarge was enabled on the service parameter > > Below is a proof the conference bridge on the hq router is > working > > HQ-RTR#sh sccp connections > sess_id conn_id stype mode codec ripaddr > rport sport > 33557433 33554446 conf sendrecv g729b 192.168.3.16 > 16386 16524 > 33557433 33554444 conf sendrecv g729b 192.168.3.12 > 18674 17838 > 33557433 33554442 conf sendrecv g711u 192.168.3.18 > 28554 18950 > > Any ideas on what the issue is > > _______________________________________________ > For more information regarding industry leading CCIE Lab > training, please visit www.ipexpert.com <http://www.ipexpert.com/> > > > > > > > -- > Regards, > > Otto Sanchez > CCIE #25592 (Voice) > Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> < > http://www.ipexpert.com/> > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com